2008 Subaru Impreza Wrx Sti Wagon 4-door 2.5l on 2040-cars

Auto blog

Factory Five's Subaru WRX-based 818 kit now on sale [w/video]

The Subaru WRX has always needed a dash more style, and the do-it-yourself carmakers at Factory Five are looking to accomplish a lot more than that with their new mid-engine, rear-wheel drive 818. The sports car started with a contest in 2011 to create the shape for the company's next vehicle, while sticking within certain limits. A designer named Nouphone Bansasi had his entry chosen, and first cars were completed last year.
The 818 is named after its target weight of 818 kilograms (1,803 pounds), and it's offered in two forms. The S starts at $9,990 and is meant for street use, with two seats and a basic interior. The R model for $10,990 is more track-focused and features a tiny windshield and full roll cage. The company claims that complete cars can be built for around $15,000, after factoring in the donor Subaru. Performance is very brisk, with acceleration to 60 miles per hour in under four seconds, according to Motor Authority.
The kits are meant to be something that even a relative novice could put together. All the builder needs to provide is a 2002-2007 Impreza or WRX. The car donates its turbocharged boxer four-cylinder engine, transmission, axles, brakes, steering and other major components. Factory Five supplies the spaceframe, body, suspension, lights, windshield and some interior trim. It doesn't even need paint, thanks to its gel-coated fiberglass body panels. The company also offers a laundry list of options, including carbon fiber aero components, upgraded suspension parts, improved brakes and more. Kits can be ordered in either left- or right-hand drive.

Subaru WRX and STI meet at the dyno with interesting results

Road and Track recently put the 2015 Subaru WRX and the 2015 WRX STI through a battery of dyno tests to find out not only how much difference there is between their two engines, but what kind of differences there are. The WRX gets the company's new FA20 2.0-liter boxer four-cylinder engine with features like a twin-scroll turbocharger, direct injection and variable valve timing on its two cams. The WRX STI stands pat with the older EJ-Series motor, meaning a 2.5-liter boxer four-cylinder with port fuel injection and carryover turbo lag. Subaru pegs the $26,295 WRX at 268 horsepower, 258 pound-feet of torque and an "extremely conservative" 0-60 mile per hour time of 5.4 seconds. The $34,495 STI clocks in at 305 hp and 290 lb-ft with a 0-60 mph time of 5.1 seconds. Ok, fight.
R&T's dyno runs sussed power numbers at the wheel of 223 hp and 245 lb-ft for the WRX, 247 hp and 243 lb-ft for the STI, then went on to demonstrate in numbers what everyone knew: that the WRX consistently puts out more of its torque earlier than the STI and achieves full boost almost three seconds quicker. On the other hand, on the track, the STI was also shown to have a conservative official 0-60 mph time, stopping the timer at 4.8 seconds compared to the WRX's 5.2 seconds.
The mag says it has comprehensive results coming from its "complete battery of tests," but for now, you can scrutinize their dyno charts and let the battle continue about which one you'd rather put your money down for.

Subaru Indiana plant to stop building Toyota Camry

Subaru may be set to end production of the Toyota Camry at its Lafayette, IN facility by 2017, according to a report from the Louisville Journal-Courier and a CBS affiliate in Columbia, South Carolina. Speaking to the plant's Executive Vice President Tom Easterday, the whole affair sounds like a done deal.
"Based on changes in Toyota's production plans, they have decided that the award-winning Camry production contract will not be renewed," Easterday said. Easterday was quick to emphasize that just because Camry production would end, doesn't mean jobs will be lost. "There will be no loss of jobs at SIA as a result of this," he said, before adding that the loss of Camry production will have no impact Subaru's $400 million investment to ready the plant for Impreza production in 2016. That said, adding a promised 900 jobs may take longer than originally planned, as Camry production staff are set to be retrained on Subaru production.
SIA currently has the capacity to produce 100,000 Camrys per year, and began production of the family sedan in 2007 alongside production of the Subaru Outback, Legacy and eventually, the soon-to-be-discontinued Tribeca.