Ford F-100, page #30

Auto blog

2015 Ford Expedition stays the course, adds EcoBoost power

The era of the body-on-frame, fullsize SUV is rapidly vanishing in favor of smaller, unibody crossovers. However, Ford still sees life in the segment with the reveal of the updated 2015 Expedition, now available (solely) with the company's 3.5-liter EcoBoost V6. The new truck will make its public debut at the 2014 DFW Auto Show in Dallas on February 19.
The loss of the previous 5.4-liter V8 in favor of Ford's 3.5-liter, direct-injected, twin-turbocharged V6 engine might rankle some of the Expedition's fans, but Ford claims that the change gives the SUV better fuel economy, more power and increased low-end torque than before. Unfortunately, official engine specifications won't be released until later this year, but Ford says engine output will be similar to the 365 horsepower and 360 pound-feet of torque that this powerplant produces in other applications. The EcoBoost is mated to a six-speed automatic transmission, and the SUV now uses electrically assisted power steering, for an even greater fuel economy advantage. Ford claims this also allows for better maneuverability at low speeds and better feel at high speeds.
Exterior styling is basically unchanged for 2015. The front end has the same three-bar chrome grille and headlight design, but the lower air dam gets added chrome and LED lamps. The rear gets more brightwork on the hatch, and there's a chrome-tipped exhaust pipe. As before, Ford is offering the Expedition in two wheelbase lengths - 119 inches and 131 inches. A new, optional, continuously controlled damping system alters suspension settings constantly based on 46 parameters and offers comfort, normal and sport modes (just like the Expedition's sister, the recently refreshed and decidedly less-attractive Lincoln Navigator).

Ford tells Congress it collects and protects some driver data

Last month Ford's Jim Farley made waves at the CES when it was reported he told show attendees, "We have GPS in your car, so we know what you're doing. By the way, we don't supply that data to anyone." Farley and Ford later partially retracted and clarified that statement.
Spurred by a desire for further transparency on data collection policies, Ford representatives answered questions from Congress, specifically Senator Al Franken (D-Minn.), about driver privacy.
The Detroit News reports that Ford told Congress it does collect some vehicle location data in an effort to "troubleshoot and improve our products" on behalf of the driver. Ford went on to say that it only collects limited data after receiving permission from owners.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.

Ford dealer loses Super Bowl bet, pays $300K to lucky customers [w/video]

A Missouri Ford dealership's Super Bowl weekend sale cost it big when the improbable happened. Hutcheson Ford ran a promotion from January 29 to February 1, called the Super Weekend Sale. The gist was, if any customer purchased a vehicle between those dates and either the opening or second-half kickoff of the big game was returned for a touchdown, the dealership would refund the purchase price.
In the dealership's defense, it seemed like a safe bet. According to the mathematicians, there was just a 2.5-percent chance of either half opening with a touchdown return. But that didn't stop Seattle's Percy Harvin from doing his part to ruin Denver's evening, returning the second-half kick for an 87-yard touchdown run. Twelve Hutcheson customers were eligible for refunds thanks to the return, with prices ranging from $10,000 to $55,000, according to Automotive News. The total amount shelled out by the dealership? $300,000.
"At least we're not like that furniture guy that lost $7 million," dealership marketing manager Kathleen Frazier told AN. We think it was a big success." The dealership did take out insurance to cover its losses, meaning the $300K won't come entirely from its pockets.

Bill Ford wins National Pond Hockey Championship with employees

Who says executives aren't people? This past weekend, Bill Ford, executive chairman of Ford Motor Company, and a group of employees trekked up to Eagle River, WI for a few games of pond hockey. Team Ford took part in the 2014 Labatt Blue/USA Pond Hockey Championship, capturing its fifth title in the 50+ Tier 1 Division.
"It feels great to win," Ford, who plays on the team alongside other Ford employees, told the USA Hockey website. "It was fun to play [River Valley Pioneers] because they're great guys and we play them every year. We finally beat them, which we were due. It was a very clean game, a tough game."
The FoMoCo team managed to score seven goals to River Valley's two, and went undefeated in all five of its games during the tourney. Take a look below for the official press release on Team Ford's win.

Find out if the Ford Fiesta ST can match Europe's latest hot hatches

The V8 grunt of the Mustang has defined Ford performance cars in the US for the last 50 years, but in Europe, the Blue Oval has nearly as a long history of building some of the best hot hatches on the market with the Fiesta, Escort and later the Focus. The latest Fiesta ST has just hit the roads on both sides of the pond and has been enthusiastically received thanks to its combination of a peppy, turbocharged engine and hatchback utility.
However, Europe is getting a bumper crop of hot hatches at the moment, including the forthcoming, third-generation Mini Cooper S. Should Ford have waited to launch the ST until it knew how the competition performed? That's the answer that Xcar is after in its latest video, and it took the Fiesta to the track and some very misty, Welsh roads to find out. Scroll down to find out whether the ST stacks up.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper.
For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011.
The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors.

Ford Mustang pinball machine has supple wrist, plays by sense of smell [w/video]

Ford didn't have anything major to show off at the 2014 Chicago Auto Show, so it seems it instead opted to have some fun - it brought a row of pinball machines to the show. Yes, pinball machines.
We originally told you about the Stern Pinball Ford Mustang machine a few days ago, and as day two of the Chicago show is a bit of a slow one, we opted to head to the show floor and get some snaps of the bank of new machines. Not surprisingly, there's plenty for the Mustang fan in each of these machines, ranging frond different models, to logos to a full model.
Take a look below for our full gallery of live shots, available up top. Then head below for our original gallery of stock images, along with a video and press release on the new machines.

Mustang-themed pinball game debuting in Chicago [w/video]

Believe it or not, but new pinball machines are still being made. Chicago-based Stern Pinball still makes them and has found a niche selling modern machines to individual buyers and arcade distributors. For its latest cabinet, Stern partnered with Ford to create a pinball game that pays homage to the 50th anniversary of the Mustang, including the next generation. The new machine is being unveiled at the Chicago Auto Show on February 6 and goes on sale in March.
Stern is offering the machine in three variants. The pro-level machine is meant for arcades and public spaces and retails for $4,995. All of them come with background and cabinet art by Camilo Pardo, who designed the Ford GT, and Top Gear USA host Tanner Foust is the game's announcer. Depending on where players shoot the ball, they activate events that simulate drag racing, rallying, drifting and racing the Mustang, and hitting targets lets players shift the gears up and down.
An upgraded, premium table with added art will be added later for pinball machine collectors. The third model is a signed, special edition with art of the 1965 Mustang and 2015 Mustang on the machine and chrome and Mustang badges on the speaker grilles. Prices for these editions will be announced later.