Find or Sell Used Cars, Trucks, and SUVs in USA

1957 Dodge W100 Power Wagon Power Giant Excellent Frame Off Restored on 2040-cars

US $26,900.00
Year:1957 Mileage:84100 Color: lights all work
Location:

Englewood, Colorado, United States

Englewood, Colorado, United States

WHAT IT IS:

This is a great looking, super running rare 1957 Dodge W100 Power Wagon. As clean underneath as it is up top. These trucks were referred to as Power Giants. The first year that Dodge made the Power Giant was in 1957 and the last year was 1960. This was the first W100 Civilian Power Wagon that Dodge made and the body style (and many parts) changed in 1958. This is a 1 year only “Forward Look” truck. There were only 427 Power Giants built with the 315 V8 and 116 inch wheel base. This truck is #207 of the 427 built that year and the VIN can be decoded. VIN is 82901207. It’s a Colorado Dry Climate Truck. In addition to it’s rarity, it has a few options that not many of these trucks had in 1957. It has heat which was not standard on every truck. The original heater box and core have been restored and everything is working nicely. It has the rare front bumper tow hooks. These are the original tow hooks from 1957 which are very hard to find. It has the hydraulic jack that would have been an optional order with the truck. It has the original rear hitch from the factory. This is very rare. I don’t know of another one with the factory hitch. It has a manual throttle cable in the cab which can be used for a winch, although no winch is currently on the truck. I have what appears to be original (dealership or factory Installed) fitted and shaped thick rubber mud flaps. They are not on the truck because I couldn’t confirm they are from the factory but they will go with the truck along with many other extra parts. I have the original Hydraulic Jack that goes in the cab. The truck has been treated to a frame off restoration and a lot of time and energy has gone into making it correct. Enthusiasts will see this in the pictures. It’s a true 57 Power Giant. I’m not claiming to be the expert because there are men who know far more than I do about these trucks. However, I have done a lot of research to get it right. The paint color combination is Dodge Truck Red and Sand Dune White.

 

THE HISTORY:

I purchased this truck off the son-in-law of the original owner. The original owner, who’s name was Victor sold (or willed) the truck to his daughter’s husband who’s name was also Victor who lived in Colorado Springs, CO. I have copies of the original paperwork to show this. I purchased the truck from him in Colorado Springs in August of 2011. He told me that his Father-In Law had used the truck mostly in Colorado, but also in Montana, and Arizona where he had different properties. Always in a dry climate. The truck had been sitting in his garage for many, many years when I purchased it. It was a great restoration truck because it had very little rust to repair and almost all of the pieces were there. This is NOT a bondo truck. The odometer showed just over 84,000 miles when I bought it. I don’t know if that is original or if it rolled over or what the actual mileage was before the restoration. It’s all redone now with less than 100 hundred miles since completed. The original owner tried to give this truck to his grand kids but they did not want it. Yes, that’s what he told me and I was surprised to hear it too.

 

WHAT’S BEEN DONE:

As I said earlier, this truck has been treated to a frame off restoration. Media blasted to bare metal. Below is a list of the things that have been done and I am sure I will forget some stuff, but I have receipts..

 

Engine rebuilt top to bottom: high compression pistons, rings, new water pump, lifters, cam, bearings, freeze plugs everything inside is new. Motor has been broken in correctly thus far. Multiple oil changes always using Zinc. Runs Fantastic, Excellent pressure and Oil pressure gauge works.

New Clutch

Transfer case gone through and sealed

Drive Train completely gone through including rebuilt splines, joints, shafts, replaced output bearing etc.

5 New 17.5 inch tires on original rims

New Wood Bed Kit from Mar-K Trucks professional installed by Ron Reichart (nicely done)

All new brakes, wheel cylinders, master cylinder, brake lines, machined drums, and shoes

Radiator and Heater Core Re-cored

New Distributor, wires, plugs, points, cap, rotor, coil etc

Rebuilt Carb

New exhaust to factory correct set-up with all new gaskets and hangers

All Body work and Paint done by Ron Reichart in IN

New Seals in doors, and front and rear glass etc

New cat wiskers and tracks for door glass

New Battery and Cables

Rear view mirror and sun visor restored ( I have the original passenger sunvisor also but it needs restored)

Repaint of original Oil Bath Air Cleaner

Factory Correct side view mirrors and original arms

New Interior done by Ron Reichart, door panels, headliners to factory correct look

Seat stuffed and reupholstered to match original vinyl (Like a saddle brown color)

New Fitted solid rubber floor mat

New NOS Ignition

New Sealed Headlights (plus an extra in the box)

New Glove Box (an great replica of the original and I have the original)

New NOS Shifter Boot

New Horn and electrical lead from the button to the horn

New transfer case boot from International

Original Steering wheel cleaned up nicely

All metal trim and badges restored to as new and re-chromed or polished depending on the metal.

All small pieces repainted

New Chrome Gas Cap but also have the original metal one.

New Tail Gate Hooks (I have the original old ones still in good condition)

Lots of small attention to detail like under hood moldings, Hinges painted to appear as bare metal, correct rubber door step moldings, correct metal rear tail lights restored (no plastic), correct original air cleaner, correct original distributor wire holders on valve covers, original 4WD locking hubs, new flasher, new brake light switch and so much more.

 

 

THE PAINT

After the truck was dismantled and brought down to bare metal and primered here in Colorado I sent the rolling chassis and body pieces to Indiana to have a Ron Reichart do all the body work and paint. The paint came out very nice. I was happy with the work but it should be noted that this is not a concours de elegance level paint job. Certainly go to a show and people will not go away disappointed but there are just a few small imperfections in places. No dents, No Dings. Paint is very nice. However, This is not a 100 point truck. There are 3 coats of clear on it so even though it does not need it now and everything looks great, down the road you could always do a wet sand with 1500 and a polish and it would be back to looking brand new. There are also three coats of clear on the wood strips in the bed so it can be polished and waxed. That’s not how things were originally done on the wood bed but for longevity and aesthetics I decided to do it.

 

SOME OF THE PARTICULARS:

All the gauges, heat, windshield wipers, interior dome light and dash lights and exterior lights all work. Both the door locks do work and the driver side has the roll over flap still in tact. There is a set of keys (2) for the ignition and a separate single key (1) that operates both the door locks. The front and rear glass are great and the small smoking windows function and lock as they should. The small window glass and roll up windows have some small bubbling inside the glass along the edge by the seam divider. I will take pictures for you to see but they are the original windows and are overall in good shape. The driver door requires a strong push to close it due to the new rubber door seals. The driver door closes well but it protrudes out just a bit because of the thick rubber door seal. The passenger side door closes nicely but the gap between the front of the door and the rear of the front fender is not perfectly spaced. The gap is a little tighter than the driver door. The hood closes and lines up nicely but the rear of the hood is not flush with the cowl. Maybe the hinges could be adjusted down just slightly. I am not a body guy and didn't want to try to adjust it. None of these items take away from the look of the truck. I’m just trying to point out every little thing for a prospective buyer. The factory didn’t put them out perfect to begin with but the pictures will show you what I am talking about. The original gauges look good and are in nice shape.  It does not have seat belts and it never came with a radio. 

 

WHAT IT NEEDS:

The truck needs an alignment. I never got around to taking it into a shop to have the alignment done. I am particular when getting new tires and I have probably less than 100 miles on the truck since they were put on, so it would advantageous to get that done. Manual choke needs to be set-up as well as manual pull throttle knob in cab. Everything is there or in parts box. A new horn will be installed and a new Signal Stat 900 turn signal switch will replace the factory switch before the end of the auction. The original switch is complete with clamp and could possibly be cleaned and reused. I just haven't gotten around to looking at it. That’s about it.

 

SUMMARY:

 

You will be hard pressed to find a 1957 W100 Dodge Power Wagon for sale somewhere in any kind of decent shape. You will have an extremely difficult time finding one with these options, and all of the original pieces that make the truck incredibly complete. I personally think that this truck is a steal at the Reserve Price.

 

There is no warranty implied, but with that being said I think I’ve touched or had somebody touch everything on it. At the end of the day it is just a nice original example that can be driven around as well as taken to shows. People will stop and stare and want to talk to you. I’ve had lots of old cars and motorcycles and this one draws attention like no other vehicle I’ve had. 

 

I can assure you that you won’t be able to find one and have it restored to this level for the same money.

 

Truck will come with boxes of extra parts, including gaskets, generator, original rare rear license plate holder, extra Stromberg carb, starter, distributor, Large complete Service Manual, extra original mirror heads, passenger sun visor arm, original gas cap, original tail gate chains, original jack and much more. I will look at all offers. It is for sale locally so I reserve the right to end the auction early if I need to.

 

 

QUESTIONS, CONCERNS, COMMENTS, MORE SPECIFIC PICTURES:

Please feel free to send me an e-mail or call my cell phone. I have additional pictures that I would be more than happy to send over. My name is Justin and I can be reached at 303-246-0003

Auto Services in Colorado

Western Auto Recycling - Commerce City ★★★★★

Automobile Parts & Supplies, Used & Rebuilt Auto Parts, Automobile Salvage
Address: 7481 Kearney St, Englewood
Phone: (303) 287-9716

Village Auto Care ★★★★★

Auto Repair & Service, Brake Repair
Address: 789 Tech Center Dr, Hesperus
Phone: (970) 259-1991

Subaru Of Loveland ★★★★★

New Car Dealers
Address: 3930 Byrd Dr, Masonville
Phone: (970) 622-1000

Subaru ★★★★★

New Car Dealers, Used Car Dealers, Automobile Parts & Supplies
Address: 5995 Arapahoe Ave, Pinecliffe
Phone: (303) 443-2919

South Main Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 1439 Howard St, Delta
Phone: (970) 874-7851

Silver Star Automotive Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Clutches
Address: 4345 S Parker Rd, Gateway
Phone: (303) 690-1225

Auto blog

Chrysler almost smothered the Hellcat before it lived

Thu, 06 Nov 2014

Chrysler's 6.2-liter supercharged Hellcat V8 was an absolute sensation from the very moment it was announced, and honestly, how could it not have been? Packing 707 horsepower and 650 pound-feet of torque, its numbers immediately put every other production muscle car (and many supercars) to shame. Plus, we soon learned that would be wrapped in a package retailing for around $60,000 - a pittance compared to other vehicles offering similar grunt. However, the Hellcat almost never got the chance to rumble under the hood of the Challenger and Charger.
The Hellcat was initially proposed back in 2011, back when Fiat was deciding its future strategy for Chrysler Group, according to Automotive News. At the time, the company was just emerging from its bankruptcy doldrums, and an ultra-high-performance V8 wasn't exactly a must-have item. The program didn't move forward. However, SRT engineers kept fighting, according to AN, and four months later, they received the green light to pull the project off the shelf and continue developing the Hellcat. The muscle car world is certainly better for that decision.
The work of those engineers focused on taking Chrysler's standard 6.2-liter V8 and making it reliably handle all of the extra power from the supercharger. "It came down to micron levels of changes in the crank to be able to withstand the pressures of the engine," said Chris Cowland, director of advanced and SRT powertrain, to Automotive News. The changes amounted to switching out about 91 percent of the parts to make the Hellcat, including some quite minuscule alterations. For example, the washer holding the supercharger pulley is embedded with industrial diamonds to keep it from slipping.

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Thu, 14 Feb 2013

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.

NHTSA investigating Ram 1500 models for rear differential failure

Mon, 30 Jun 2014

The National Highway Traffic Safety Administration is investigating Fiat Chrysler Automobiles and its Ram brand following a number of reports regarding the 2005 Dodge Ram 1500 pickup. According to 15 consumer complaints, the trucks' rear differential locked up while in other cases, the driveshaft separated at its connection to the diff.
Nearly half of the reports claim the truck was traveling at or above 50 miles per hour, while two consumers reported that the diff lockup/driveshaft separation sent their pickups into a spin. Most troubling, though, is that consumers reported little to no sound indicating there was a problem with their truck.
We reached out to Ram for additional information, such as how many vehicles may be affected or what equipment might be fitted that could cause the issue. Unfortunately, the company wasn't willing to elaborate on specifics.