1986 Silverado 1 Ton Lifted Ex Show Truck on 2040-cars
Keyser, West Virginia, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:383
Fuel Type:Gasoline
For Sale By:Private Seller
Make: Chevrolet
Model: C/K Pickup 1500
Cab Type (For Trucks Only): Regular Cab
Trim: silverado
Options: 4-Wheel Drive, CD Player
Drive Type: 4x4
Power Options: Air Conditioning, Cruise Control
Mileage: 500
Sub Model: silverado
Exterior Color: White
Disability Equipped: No
Interior Color: Red
Warranty: Vehicle does NOT have an existing warranty
Number of Cylinders: 8
1986 1 ton Silverado roughly 80,000 miles on the body,10" lift 38.5 mickey Thompson Baja claw's,weld wheels 3" billet wheel spacers,383 stroker motor,turbo 400 transmission,dana 60's front ,and rear,588 gears,rear disc brakes,steel cowl hood,working cold ac,the bed behind driver rear tire has very light surface rust coming through,the driver side cab corner has light surface rust coming through,no rust holes.The truck was fully restored roughly 5 years ago.The truck run's and drives excellent,the interior could use a little work,the seat is perfect,the dash is good,the trim moldings,and door panels are faded,and the carpet is good,the body was pulled off of the frame,and the frame was stripped,and painted,and fully detailed,the frame is extra extra clean.This was a ex show truck..Any questions you can email me direct at bad87gn@yahoo.com,I may take a partial trade on a non 4x4 vehicle,no boats or motorcycles.
It has been converted from a 1/2 ton to a 1 ton
Chevrolet C/K Pickup 1500 for Sale
1986 chevrolet k 1500 4x4 stepside silverado
1986 chevrolet 1500 truck(US $4,000.00)
1977 chevy 1500 short box 4x4 restored(US $10,000.00)
Beautiful lifted c/k 10 chevy 402 bb custom(US $15,500.00)
Customized silverado z71 4x4 5.7 rebuilt tranny very low reserve! 3:73 gears!
1995 chevrolet c1500 wt standard cab pickup 2-door 6.5l
Auto Services in West Virginia
Thumpin Car Stereo Inc ★★★★★
Saffford Chrysler Jeep Dodge ★★★★★
Roy`s Quality Car Care ★★★★★
Griff`s Auto ★★★★★
Fisher Auto Parts ★★★★★
City Cars ★★★★★
Auto blog
GM recalling nearly 4,000 vehicles over airbag concerns
Thu, 31 Jan 2013Four different General Motors vehicles from the 2012 model year are being recalled over a potential airbag issue. The driver's side airbag shorting bar in the 2012 Buick Verano and 2012 Chevrolet Camaro, Cruze and Sonic might make contact with the airbag terminals, even during a crash. If so, the airbag won't deploy when it should, possibly increasing injury to the driver.
The recall is expected to begin on February 13 for the 3,896 units that might be affected. GM will notify owners who can then take their vehicles to dealers to have the airbag coil replaced. A bulletin from the National Highway Traffic Safety Administration below has more info.
Next-gen Chevy Cruze caught cruising in the cold
Wed, 13 Feb 2013Spy photographers have caught what looks like the next-generation Chevrolet Cruze out on snow patrol. The camo could be tricking our eyes, but it look like it has an even tidier, more rounded front end and even lower fenders in relation to the top of the hood. And either a chunk of camo has been wedged between the side mirrors and the doors, or the mirrors are up for revision, too.
The door handles have been moved up the side of the car, leading the way to a rear end that grows a bit in length. If the rumors are true, the coming second-generation Cruze sits on the new D2XX platform that will replace the Delta and Theta platforms at General Motors. A global architecture, the Cruze will be the first to get it, but it will underpin everything from next Chevrolet Volt to the Equinox and could be responsible for 2.5 million units by 2018. The next Cruze is expected to begin production in GM's Lordstown, Ohio plant in the third quarter of 2014.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.