Find or Sell Used Cars, Trucks, and SUVs in USA

1954 Ford F100 Pro Street on 2040-cars

Year:1954 Mileage:1000
Location:

Livonia, Michigan, United States

Livonia, Michigan, United States

1954 Ford F100 Pro Street. Complete frame off restoration.  Has all new parts with great paint. Interior does have some detail work that needs to be finished. Street legal and runs strong.  Truck was featured in My Ford Magazine. See below for vehicle highlights.

  • 1955 grille with Fairlane glass tilt front end.

  • Steel body filled in cowl vent and body lines on side of cab, new firewall, and floor .

  • Cut drip rail off cab around windshield and doors filled in dash to smooth out.

  • All new tinted glass and rubber.

  • New door handles, latches and weather striping

  • Bed is a Pro’s Pick smooth bed with roll pan

  •  Oak wood floor added

  • Steel tubing under bed to add strength. Tubes are steel with fiberglass over them to smooth  out

  • Running boards are steel Pro’s Pick.

  • Rear fenders are Fairlane three inch wider fiberglass

  • Painless wiring harness

  • Idit smooth  GM column with grant wheel

  • VDO gauges

  • PPG paint

  • 1981 Chevy 1/2 ton truck frame

  • New power steering box, tie rods, a arm bushings, and ball joints

  • Front disc brakes with new calibers and discs, rear drum brakes, new drums, hardware, new master cylinder, 6” break booster

  • Weld racing wheels.

  • Tires are Mickey Thompson - rear tires are 29x18.5 

  • 12 bolt narrow rear end with 3:73 and Eaton clutch type poise adjustable ladder bar suspension  qa1 12 position shocks with aluminum coil overs  

  • Turbo 350 trans with B and M shift kit and Lokar shifter

  • Chevy 350 small block bored and stroke with 400 crank 4 bolt mains

  • Edelbrock  rpm kit aluminum heads roller rockers, rpm aluminum intake,  cam shaft, 750 carb

  • Aluminum radiator with electric fan

Seller reserves the right to remove this listing at any time.

Auto Services in Michigan

Village Automotive Repair ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 31470 Mound Rd, Grosse-Pointe
Phone: (586) 275-2777

Valvoline Instant Oil Change ★★★★★

Auto Repair & Service, Automotive Tune Up Service, Auto Oil & Lube
Address: 20827 John R Rd, Ecorse
Phone: (248) 547-4114

Unique Auto Care ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 10301 W 8 Mile Rd, Washington-Township
Phone: (866) 595-6470

Toledo Sign Co Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Signs-Maintenance & Repair
Address: 2021 Adams St, Lambertville
Phone: (419) 244-4444

Tim Leslie Auto & Truck Svc ★★★★★

Auto Repair & Service, Truck Service & Repair
Address: 221 Northbound Gratiot Ave, New-Baltimore
Phone: (586) 463-3990

The Collision Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 510 E Maple Rd, Harrison-Township
Phone: (248) 589-3280

Auto blog

Jaguar design boss admits X-Type was a mistake

Thu, 19 Sep 2013

History has a way of repeating itself, especially in the auto industry. When Jaguar was owned by Ford, the British brand attempted to field a competitor for the BMW 3 Series, called the X-Type. Based on the bones of a Ford Mondeo, it aped the styling of Jaguar's flagship model, the XJ, while borrowing liberally from the Ford parts bin. That was 2001.
Now, in 2013, Jaguar is planning a new 3 Series challenger based on the platform previewed by the C-X17 Concept, while Ford is attempting to take the latest Mondeo upmarket. The moves have both brands recognizing where, why, and how the X-Type failed. "It didn't look mature or powerful or anything. It was just a car," Jaguar's current head of advanced design, Julian Thomson, told PistonHeads. Basing the X-Type on a front-drive car while giving it styling that was meant for a rear-driver lead to proportions that "were plainly wrong," Thomson told PH. Ford's European head of quality, Gunnar Herrmann, added that the X-Type was "a fake Jaguar, because every piece I touch is Ford."
For what it's worth, the X-Type's successor in the segment will sport rear-drive, with plenty of input from Ian Callum. Thomson described the new model, which would challenge the 3 Series as having, "Big wheels right to the ends of the car, low bonnet, short overhangs, very low cabins." Sounds good to us.

Ford EcoBoost V6 hits the dyno before hitting the track

Wed, 02 Oct 2013

Ford Racing just unveiled the Riley Daytona Prototype that will make its racing in the United SportsCar Racing Championship Rolex 24 at Daytona in January, and now it has released a video showing development of twin-turbo 3.5-liter EcoBoost V6 that powers the car. Using the same block and heads that can be found on a production Ford Taurus SHO, this new racecar benefits from the collaboration between Ford Racing and Ford powertrain engineers.
While we still don't know what kind of power this engine is putting out, it has definitely gotten a workout at Ford's 17G dyno. This area deep within Ford allows the automaker's racing program to work hand-in-hand with production engine programs, which can be a benefit to racing operations and production cars alike. Scroll down to hear a few people from Ford talk about the crosspollination between its racing and engine teams and watch the EcoBoost get red hot on the dyno.

Ford board OK with Mulally stepping down earlier

Fri, 06 Sep 2013

Ford's board is open to CEO Alan Mulally stepping down before his planned departure in 2014, inside sources are telling Reuters. Ford's plan of succession, aside from who would be his actual successor, has been something approaching common knowledge - the 68-year-old former Boeing exec had plans to stay through 2014. This was recently confirmed by Mulally himself on Bloomberg Television and in Automotive News.
Motivation for the about-face comes from what Reuters calls a "growing confidence" in the current crop of Ford execs, led by Mark Fields. Fields, Ford's current chief operating officer, has been tipped as Mulally's ultimate successor, although he's far from the only person with eyes on Ford's top job. Normally, Ford's board saying they're open to an executive, that's done very well for the company, stepping down early would be nearly unremarkable. It's the timing of this announcement, though, that makes this a big piece of news.
Recently, Mulally has been the subject of rumors that he's interested in taking the CEO position at tech giant Microsoft. The Redmond, Washington-based company's CEO, Steve Ballmer, told the media in August that he'd be retiring in a year's time. The fires were stoked when tech website AllThingsD speculated that Mulally would take the top spot, despite denials from the man himself. Could Ford's current boss become the new top dog at Microsoft? Will Mark Fields replace him? Could recently departed Renault exec Carlos Tavares land at Ford in some capacity? Let us know what you think below in Comments.