2015 Ram Promaster High Roof Conversion on 2040-cars

Auto blog

2015 Ram Promaster City will work for $23,130*

Need a cargo van, but nothing too big? Fiat Chrysler Automobiles could have the answer in the form of its new Ram ProMaster City. Essentially a domesticated version of the Fiat Doblo, the ProMaster City joins the Ram family as the baby brother to the larger ProMaster (née Fiat Ducato). But if you've been wondering how much one will set you back, Auburn Hills has now announced pricing.
The 2015 Ram ProMaster City Tradesman Cargo starts things off with a $23,130 MSRP, plus a $995 destination charge. Upgrade to the Tradesman SLT Cargo and you'll be looking at $24,655, while the passenger-oriented Wagon and Wagon SLT start at $24,130 and $25,655 respectively (again, plus $995).
The base delivered price of $24,125 makes the new Ram ProMaster City more expensive than its competition, with the Nissan NV200 the cheapest in the segment at $21,605, the Chevy City Express starting at $22,950 and the Ford Transit Connect starting at $23,125 (all prices including destination fees).

2014 Ram Promaster reporting for duty

We already knew Chrysler would be getting its own version of the Fiat Ducato for use as the 2014 Ram Promaster, but it was just a question of when and what changes would be made. Well now we know. Though far from conventional-looking, the new Promaster should give Chrysler a fullsize van that is more competitive than the old Ram Van and more affordable than the Mercedes-based Dodge Sprinter.
Chrysler says it made numerous changes to transform the Ducato into the US-friendly Promaster, and the biggest changes were made to the powertrains. Standard equipment on the Promaster 1500 is the widespread 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque paired, which, paired with a six-speed automatic transmission, offers a gross combined weight rating (GCWR) of 11,500 pounds. Other models will get the 3.0-liter diesel inline four-cylinder producing 174 hp and 295 lb-ft of torque, giving this version a GCWR of 12,500 pounds, and this engine is mated to a six-speed automated manual transmission.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.