10 Xterra S 4.0 Carfax Certified 1 Owner Low Reserve Automatic Pre Owned 4x4 4wd on 2040-cars

Auto blog

Nissan Leaf Nismo RC Concept [w/video]

Nissan took the wraps off its Leaf Nismo RC Concept at the New York Auto Show more than two years ago. As inferred, the vehicle shares many of its pure-EV components with the production Leaf currently sitting in your dealer's showroom. But don't assume the concept is a placid, family friendly, four-place, front-wheel-drive plug-in for grabbing groceries - the RC (as in "Racing Challenge") is a purpose-built, two-seat, rear-wheel-drive prototype race car tuned for the short track.
The RC Concept is fitted with an 80-kW AC synchronous motor driving the rear wheels and drawing power from a 48-module lithium-ion battery. While the motor and battery are nearly identical to the consumer-friendly Leaf, a sleek full carbon-fiber monocoque body shell and a slew of other enhancements mean the RC is 40-percent lighter, a foot shorter in overall height and nearly seven inches wider than its commuter namesake. Nissan says the RC Concept will hit 62 miles per hour in about 6.8 seconds, top out at 93 mph and run for about 20 minutes under race conditions (it will accept an 80-percent charge in 30 minutes with a quick-charger). Understandably, if a zero-emissions motorsport series comes to fruition, the races would be short and nearly silent.
We caught up with the Leaf Nismo RC concept in Southern California, where we were offered the opportunity to zip it around a tight autocross at the former Marine Corps Air Station, El Toro.

Nissan adds 500 jobs in Mississippi for Murano production [w/video]

Nissan is bolstering its workforce at its Canton, MS factory, adding 500 workers for this fall's production kickoff of the heavily redesigned Murano crossover.
"The addition of Murano to our portfolio, coupled with the continued growth and success of the Canton plant, will move us even closer to our goal to build more than 85 percent of the vehicles we sell in the US right here in North America," said senior vice president of manufacturing, supply chain management and purchasing for Nissan's North American ops, John Martin.
The Murano will eventually be exported to over 100 markets and will be built alongside the current Xterra, Frontier, Titan and Armada. The addition of 500 jobs to the Canton facility elevates its total workforce past 6,000 people.

Nissan IDx 'in the plan' for production, needs support from fans [w/poll]

If there's a trend in the auto industry we can firmly get behind, it's the small, light and affordable rear-drive coupe. The positive critical reception to the Scion FR-S and Subaru BRZ twins has encouraged other manufacturers to look at building their own rear drivers, and even a few to show actual concept cars based on the idea. The Chevrolet Code 130R from 2012 and more recently, the Nissan IDx twins that were first shown at the 2013 Tokyo Motor Show both come to mind, as does the brand-new Kia GT4 Stinger Concept.
Nissan trotted out the IDx Nismo and the IDx Freeflow for another showing in Detroit and we'll admit to being totally smitten with both cars. Again. The duo draw inspiration from the iconic Datsun 510, a lightweight, affordable rear-driver that remains a cult favorite decades after production ended.
Now, a report from our friends at AutoWeek reveals that we may, possibly, hopefully see a production IDx, provided fans make a strong enough case for it. "It's in the plan," Nissan product boss Andy Palmer told AW. According to the report, Palmer said the IDx is "into the first sage of the development process. The next stage is project validation and then looking at the business case. It's no one's intent to waste millions of the company's money, so obviously we have a good feeling about this one."