1995 Nissan Pickup Xe Standard Cab Pickup 2-door 2.4l on 2040-cars

I am selling my 1995 Nissan hardbody truck.  I have done all work on my own so I know what has and hasn't been done. Work performed as if you would want it for yourself.  No warranty or guarantees sold as is.  Title in hand and must be transferred (no signing over for a later time)

Here is run down of new parts

Upper and lower ball joints, Shocks, Left tie rod end, front calipers and pads, rear drums and shoes, new nickel copper brake lines from the firewall back, front engine seal, rear engine main seal, clutch, throwout bearing, pilot bushing, pressure plate, slave cylinder, tranny rear seal, transmission flush done at 84000,  clutch has about 2500 miles on it.  Shifts very smooth

truck has a professional paint job done to match the factory kko color. Paint is flawless besides a few chips from wheels on bed and tar, along with a few small scratches on tailgate from not being adjusted.  Will buff out.  replaced both front fenders, bed, hood, lower valance, and all dents before paint.  I also had a custom tailgate made with the plate pocket cut in along with a light.  handle is on inside of tailgate. cab is solid on truck.

As for lights I switched to an aftermarket headlight set up and did all clear lights with yellow bulbs (turn signals and running lights)  Replaced grille and bumper along with bumper corners.  Rear has aftermarket tails and also a roll pan instead of bumper.

As for exhaust I have a super 40 flowmaster dual outlet underneath.  For only being a 4 cylinder is sounds mean.  Up front there is a pacesetter header. Exhaust is not stainless

Truck comes with 4 factory wheels and 3 tires mounted on rims along with the 18s on the truck now. 18s do rub alittle on front if you hit a bump at high speeds. 

Truck is lowered with 2 inch belltech drop spindles and 2 inch blocks in the rear.

I did replace the gauge cluster.  Original cluster quit working at 48250 in 2010.  I purchased truck in December of 2011.  Truck has 86305 on it now.  Truck does burn a little oil.  I am running synthetic in it now.  I believe it is burning due to valve seals.

For the interior I have a kenwood head unit installed with new 6.5'' speakers in the doors along with two additionals behind the seats in boxes.  I removed the bench seat and put the buckets in.  very comfortable Nissan seats from another truck.  The headliner is done in zebra print.  very sharp looking.  Truck is missing two things inside, one is carpet and two is a steering column cover.  Ignition has some play on key but doors lock and unlock fine.  Has factory power mirrors.  Heat does work and a/c is not charged.  There is 18% tint on side and rear sliding window.

Frame was scraped and re uncoated like it is new.  Clean underneath.  No re welds done to frame.

Overall a fun truck to drive.  Would make a sweet show truck.  A lot of potential.  I have thousands invested in the truck but would like to see it go to a new home since I am busy with other projects.  if you have any additional questions feel free to email me or ask for my number.  I will talk personally about vehicle if you wish.

Thank you and happy bidding!