2013 Nissan S 2500 on 2040-cars

Auto blog

Nissan's Cummins tie-up bears first fruit with Frontier Diesel Runner concept

The 2014 Chicago Auto Show is proving to be a surprisingly big show for alternative fuels. The Chevrolet Silverado HD pickups are getting a compressed natural gas option and the refreshed BMW X3 is receiving a diesel engine, as is the German automaker's 7 Series. You can add one more oil burner to the mix, at least in concept form: Nissan has released its Frontier Diesel Runner Powered by Cummins with a 2.8-liter, four-cylinder turbodiesel engine and an eight-speed automatic transmission from ZF.
While Nissan calls the Cummins-powered Frontier a concept, it's really just a Frontier DesertRunner 4x2 with a diesel engine replacing the standard 4.0-liter V6, and it's meant to gauge consumer interest for a diesel option in the next-generation Frontier. Nissan has clearly noticed that Chevrolet will be offering a diesel in its new Colorado and wants to see how buyers will react to a mid-size alt-fuel pickup from a Japanese brand.
Exterior modifications to the concept are minor. To show off the engine, there is a transparent hood insert and the pickup has been painted in a two-tone finish of high-gloss red and matte silver edged in carbon fiber trim. The interior gets the same combo of red, silver and carbon fiber to match the outside.

Renault-Nissan debuts new Common Module Family for future vehicles

Platform sharing is nothing new for the 14-year-old Renault-Nissan Alliance, but this partnership is set to introduce new modular platform components that will eventually underpin 11 Renault models and three Nissan vehicles by 2020. Rather than being a typical platform, the Common Module Family (CMF) actually represents five segments of a platform that can be used in various applications, and one of the first vehicles to use this architecture will be the 2014 Nissan Rogue (spy shots of which are shown below) when it arrives "in late 2013."
As pictured in the image above (click to expand), CMF is composed of four chassis component, principally the front underbody, rear underbody, engine bay and cockpit as well as a common electrical system. Besides the next-gen Rogue, future Nissan models to share CMF will include the Qashqai and X-Trail, while Renault models will start using the platform next year on vehicles including the Scénic and Laguna. The CMF architecture is expected to help the Alliance reduce the parts cost of a vehicle by up to 30 percent and reduce the entry cost by up to 40 percent. The official press release with more details about CMF, and what it means for Renault-Nissan, is posted below.

Nissan reveals radical BladeGlider concept for Tokyo debut

Radical reinvention of the automobile doesn't happen very often. There's a reason they refer to it as "reinventing the wheel", after all. But that's what a team of racecar designers did with the original DeltaWing concept in 2010. Originally proposed as an IndyCar racer, the project was subsequently redesigned for Le Mans. That's when Nissan got on board, supported the project for a few races, then took the design in its own direction with the ZEOD RC. And now it's taking it to the road... via the auto show.
What we have here is the BladeGlider concept, a proposal for a delta-shaped electric sportscar which Nissan will present at the Tokyo Motor Show in a couple of weeks. Designed to focus on driving pleasure, the BladeGlider is about as radical as they come. Like the DeltaWing and ZEOD RC, it's got a narrow front track and wide rear to minimize drag and optimize stability, packing a 1+2 seating arrangement to put the driver front and center like in a McLaren F1, with upward-swinging doors and underbody aerodynamics to keep it glued to the road. In-wheel motors (of unspecified output) provide the power, a lightweight lithium-ion battery (not to mention the carbon-fiber bodywork) keeps it all fearther-like, and weight distribution is heavily biased towards the rear at 30:70.
A radical concept, to be sure, but here's the kicker: Nissan wants to build it. As you can see from the press release below, the BladeGlider "is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype for an upcoming production vehicle". While it would undoubtedly take some time to develop, much less certify for road, seeing one of these - or even better, driving one - on our favorite stretches of tarmac strikes us as a prospect worth waiting for.