Nissan Frontier One Owner Black 4x4 New Tires Extra King Cab Loaded Truck on 2040-cars

Auto blog

Nissan Qashai gets the Juke R treatment

It would appear that we're a little behind the times on this one, but a UK-based tuner of the Nissan GT-R is creating its own take on the lustworthy Juke-R starting with the Nissan Qashqai crossover. Severnvalley Motorsport claims to be the leading authority for tuning of the current GT-R in Europe. The outfit is now turning its attention to stuffing the drivetrain of a GT-R under the body of a Qashqai+2 - a seven-passenger compact crossover similar in size to our Nissan Rogue - resulting in the Qashqai-R.
The project started back in March when Severnvalley took delivery of a new Qashqai. After stripping the crossover down to its bare essentials and building a custom jig to support the body shell, it was then transferred onto an awaiting GT-R chassis. The crew aimed to keep Qashqai's appearance as stock as possible, but fender extensions and hood vents were required to accommodate the sports car underpinnings.
The white Qashqai-R seen above will be tuned to produce 900 horsepower, while a black version will get bumped up to 1,000 hp. And, looking at the build photos, we surmise that this project will take nothing less than a herculean feat of supercar determination before it's through.

Nissan recalling 841k vehicles overseas for steering wheel trouble

A possible issue with a steering wheel bolt in the Nissan Micra (shown) and Cube from the 2002 to 2006 model years has Nissan recalling roughly 841,000 units on four continents, as well as Oceania and the Middle East. On the affected cars, the bolt may not have been tightened properly, which could lead to a loss of steering in a worst-case scenario. According to Reuters, there haven't been any reports of accidents or injuries due to the fault, however.
The Micras affected were built in the UK and Japan, the Cubes in Japan. Nissan has yet to say when the recall will begin, but when it does, owners can take their cars to dealers for repairs; the bolt with either be tightened or, if necessary, a new steering wheel installed.

Nissan reveals radical BladeGlider concept for Tokyo debut

Radical reinvention of the automobile doesn't happen very often. There's a reason they refer to it as "reinventing the wheel", after all. But that's what a team of racecar designers did with the original DeltaWing concept in 2010. Originally proposed as an IndyCar racer, the project was subsequently redesigned for Le Mans. That's when Nissan got on board, supported the project for a few races, then took the design in its own direction with the ZEOD RC. And now it's taking it to the road... via the auto show.
What we have here is the BladeGlider concept, a proposal for a delta-shaped electric sportscar which Nissan will present at the Tokyo Motor Show in a couple of weeks. Designed to focus on driving pleasure, the BladeGlider is about as radical as they come. Like the DeltaWing and ZEOD RC, it's got a narrow front track and wide rear to minimize drag and optimize stability, packing a 1+2 seating arrangement to put the driver front and center like in a McLaren F1, with upward-swinging doors and underbody aerodynamics to keep it glued to the road. In-wheel motors (of unspecified output) provide the power, a lightweight lithium-ion battery (not to mention the carbon-fiber bodywork) keeps it all fearther-like, and weight distribution is heavily biased towards the rear at 30:70.
A radical concept, to be sure, but here's the kicker: Nissan wants to build it. As you can see from the press release below, the BladeGlider "is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype for an upcoming production vehicle". While it would undoubtedly take some time to develop, much less certify for road, seeing one of these - or even better, driving one - on our favorite stretches of tarmac strikes us as a prospect worth waiting for.