Nissan 300zx Non Turbo on 2040-cars

Auto blog

Did Nissan send a ringer GT-R to run the 'Ring? [w/video]

It turns out that after toting a 7:08 time around the fearsome Nürburgring Nordschleife for the new Nismo-tuned GT-R, Nissan might not have been entirely honest about the car it was using. From what we've been hearing from a few different publications, the GT-R featured in the video isn't what we're going to see on the production model.
PistonHeads reported on the so-called "Time Attack" GT-R while it was in Japan for the Tokyo Motor Show, going so far as to detail the differences between it and the standard GT-R Nismo. And friends, this isn't just a matter of swapping tires. The mods made to the Time Attack car are far more comprehensive.
For a start, the TA produces more downforce thanks to larger aerodynamic pieces. It's some 110 pounds lighter than the standard car, thanks to new bucket seats. The ECU and dampers have been swapped for new units, and the brake pads are different as well. If you've read this far, you might be feeling slightly angry or betrayed that Nissan is toting numbers for a modified car. Don't be.

2013 Nissan GT-R and 2013 Alpina B6 mix it up on track and street

Here we have Autocar making an unforeseen comparison: the Nissan GT-R against the Alpina B6 at Brands Hatch and on public roads. Steve Sutcliffe clobbers the circuit in the 3,828-pound, all-wheel-drive sports car, then sees how well the 4,114-pound, rear-wheel drive grand tourer does against it.
Sutcliffe says there are quite a few similarities between the two cars, but that's really only on the spec sheet. The Nissan's got two turbos attached to its 3.8-liter V6, 542 horsepower and 465 pound-feet of torque. The Alpina's got two turbos attached to its 4.4-liter V8, 532 hp and 528 lb-ft. But one's brief is to be a monster on the track, the other on the boulevard, and if there's anything the video demonstrates, it's each car's focus.

Nissan IDx 'in the plan' for production, needs support from fans [w/poll]

If there's a trend in the auto industry we can firmly get behind, it's the small, light and affordable rear-drive coupe. The positive critical reception to the Scion FR-S and Subaru BRZ twins has encouraged other manufacturers to look at building their own rear drivers, and even a few to show actual concept cars based on the idea. The Chevrolet Code 130R from 2012 and more recently, the Nissan IDx twins that were first shown at the 2013 Tokyo Motor Show both come to mind, as does the brand-new Kia GT4 Stinger Concept.
Nissan trotted out the IDx Nismo and the IDx Freeflow for another showing in Detroit and we'll admit to being totally smitten with both cars. Again. The duo draw inspiration from the iconic Datsun 510, a lightweight, affordable rear-driver that remains a cult favorite decades after production ended.
Now, a report from our friends at AutoWeek reveals that we may, possibly, hopefully see a production IDx, provided fans make a strong enough case for it. "It's in the plan," Nissan product boss Andy Palmer told AW. According to the report, Palmer said the IDx is "into the first sage of the development process. The next stage is project validation and then looking at the business case. It's no one's intent to waste millions of the company's money, so obviously we have a good feeling about this one."