1965 Ford Fairlane 500 4.7l 289 V8 4 Bbl Engine Rebuilt And Modified on 2040-cars
Poway, California, United States
|
Here for sale is a 1965 Ford Fairlane 500 2 door Hardtop. I bought this car in Arizona about 3 years ago and was going to restomod it. I have since moved on to other projects and no longer have time for this one. So that being said here is the scoop on this car. This car has a CLEAN title in my name. It is currently registered and insured until 02/08/15. It’s an Arizona car so hardly any rust. Rocker panels appear to be solid, roof lines also. Floor boards and trunk all appear solid. Car needs interior, body work, paint, transmission rebuild and currently doesn’t start. It appears that the ignition switch is bad. The engine turns over at the solenoid with a starter test button. So I am buying a switch and it will be included with the car if not already installed by the time someone buys this car. Also the missing trim pieces are included but are pretty rough and will need major repair. It’s missing the driver side door panel. The dash is in pretty good shape. Also installed a new radiator and gas tank.
The engine however is where I put my money. The short block was rebuilt with components from the Edelbrock 289 Top End Kit model #2027. Top End Engine Kit, Power Package, Intake, Cylinder Heads, Cam, Timing Chain, Head Bolts, Ford, 289, Kit. The kit can be looked up online to see what’s included but basically a mild camshaft, Edelbrock aluminum heads, and an Edelbrock Performer RPM intake manifold. Also installed an Edelbrock carb. About $2900 invested in the engine alone. The specs are listed below for the Top End kit. So I am still trying to get this car running but if anyone is ready to take the car as is, it’s up for grabs.
Brand: Edelbrock Manufacturer's Part Number: 2027 Part Type: Top End Combos Product Line: Edelbrock Power Package Top-End Kits UPC: 085347020270 Cylinder Heads Included: Yes Cylinder Head Style: Assembled Cylinder Head Material: Aluminum Cylinder Head Finish: Natural Combustion Chamber Volume (cc): 60 Intake Runner Volume (cc): 170cc Intake Port Location: Standard Exhaust Port Location: Standard Spark Plug Style: Straight Intake Valves Included: Yes Intake Valve Diameter (in): 1.900 in. Exhaust Valves Included: Yes Exhaust Valve Diameter (in): 1.600 in. Valve Springs Included: Yes Outside Diameter of Outer Spring (in):1.250 in. Damper Spring Included: Yes Number of Springs per Valve: Single Retainers Included: Yes Retainer Material: Steel Locks Included: Yes Lock Style: 7 degree Valve Stem Seals Included: Yes Valve Stem Seal Style: Umbrella Rocker Arm Studs Included: No Rocker Arm Nut Thread Size: 3/8-24 in. Rocker Arms Included: No Guideplates Included: No Accessory Bolt Holes Drilled: Yes Valve Guides Included: Yes Valve Guide Material: Manganese bronze Valve Seats Machined: Yes Valve Seat Material: Ductile iron Oiling Style: Through pushrod Head Gaskets Included: Yes Intake Manifold Included: Yes Carburetor Quantity: One Intake Style: Dual plane Basic Operating RPM Range: Idle-5,500 Intake Finish: Natural Intake Material: Aluminum Intake Manifold Gaskets Included: Yes Intake Manifold Fasteners Included:Yes Camshaft Included: Yes Cam Style: Hydraulic flat tappet Intake Duration at 050 inch Lift: 204 Exhaust Duration at 050 inch Lift: 214 Duration at 050 inch Lift: 204 int./214 exh. Advertised Intake Duration: 270 Advertised Exhaust Duration: 280 Advertised Duration: 270 int./280 exh. Intake Valve Lift with Factory Rocker Arm Ratio:0.448 in. Exhaust Valve Lift with Factory Rocker Arm Ratio:0.472 in. Valve Lift with Factory Rocker Arm Ratio:0.448 int./0.472 exh. Lifters Included: Yes Timing Chain and Gears Included: Yes Quantity: Sold as a kit.
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. These kits include almost everything you need to make serious horsepower.
|
Ford Fairlane for Sale
1967 ford fairlane 500 gt convertible street rod, hot rod, custom,
1959 ford fairlane 500, 2-door hardtop, * runs and drives good *
1963 ford fairlane base
1967 ford fairlane wagon hot rod rat rod(US $16,200.00)
1967 ford fairlane rare 390 v8 35,000 original miles a/c auto,red patina finish
63 ford fairlane 500 2 door coupe red 289ci show car powerglide classic antique(US $10,500.00)
Auto Services in California
Zenith Wire Wheel Co ★★★★★
Yucca Auto Body ★★★★★
World Famous 4x4 ★★★★★
Woody`s & Auto Body ★★★★★
Williams Auto Care Center ★★★★★
Wheels N Motion ★★★★★
Auto blog
Shelby to auction 2012 GT350 No. 1 in Vegas
Thu, 19 Sep 2013With Shelby preparing to wind down production of its brutal GT350, a 624-horsepower Mustang that's meant to go up against the Roush Stage 3 in the world of tuned Ford ponycars, the Las Vegas-based tuner is looking to give back to one lucky customer. It'll auction off the very first GT350 ever produced, at the 2013 Barrett-Jackson auction in Las Vegas, a three-day event that runs from September 26 through September 28.
The GT350 is a monster, with a 5.0-liter, supercharged V8 that's been tuned well past 600 horsepower in a time when Ford's own Shelby-branded GT500 barely reached 550 horsepower. The GT350 is much louder than Ford's effort, too, both visually and audibly. The wide body look isn't what we'd call conventional, but on a car that sounds and goes like this, something extreme is needed. According to Shelby American's vice president of production, Gary Davis, "Carroll was very excited about the new wide body option, so that was included on this car. It's the first 2012 GT350 serial number from our anniversary year. It is a very special car." Wilwood brakes, a massaged suspension, and some very fat, sticky tires add to the Shelby experience.
This particular GT350 will be lot number 750, and will cross the Barrett-Jackson stage on Sunday, September 28.
BMW V8-powered Ford Model A is the definition of Hot Rod
Thu, 20 Jun 2013Today, hotrodding has a pretty staid definition. Take one classic American car, add one classic American V8, sprinkle with tire smoke and you pretty much have every hot rod to roll out of a shop in the last 40 years. Mike Borroughs knows it wasn't always this way. Once upon a time, getting your bucket to go faster meant grabbing whatever parts were lazing about the yard, bolting them together with a bit of ingenuity and laughing your way down the quarter mile. It's in that spirit that Burroughs built his 1928 Ford Model A.
Rather than turn to the tired flathead or the common Chevrolet small block, Burroughs plucked a 4.0-liter V8 from a 1995 BMW 7 Series. With 300 horsepower and 300 pound-feet of torque, the engine has no trouble shuffling the old A around town. He had to build a custom chassis to get everything to cooperate, but the result is a 1,500-pound heathen that looks built to harass dry lake beds. You can check it out in the video below. Be warned, the soundtrack by Hanni el Khatib may not be safe for work - awesomeness of this caliber rarely is.
Nelson Piquet and Nigel Mansell revisit bitter F1 rivalry in... Ford Fusion campaign?
Wed, 23 Jan 2013Formula One World Champions Nelson Piquet and Nigel Mansell haven't been on good terms since the 1986 season, when Piquet joined Mansell at the Williams team and Piquet spent the year privately fuming about not being granted the status of number one driver. Things only got worse from there - even though Piquet won the title the following year with Williams, still partnered with Mansell, the fuming was a lot less private.
They're back together after a 25-year silence, in the city of Porto Alegre, Brazil to drive the new Ford Fusion. Called "Fusion Grand Prix," both men get the new Ford sedan, prepped to their liking - but still street legal, we assume - for a race to decide... well, who is faster behind the wheel of a Fusion.
There will be four episodes, with the first two having already aired. The third episode comes on January 29 and the race happens February 5. You'll find two video episodes and a press release below, but note - because it's a campaign for Ford Brazil, Piquet's dialogue in the vids isn't translated, so hit the Closed Captioning button to hear his side of the smack talking.