1967 Ford F-100 Standard Cab Short Bed Manual Transmission on 2040-cars

Auto blog

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.

Ford bringing C-Max Solar Energi Concept to CES

Solar energy might not be enough to power a usable electric vehicle on its own, but that doesn't mean it can't lend a helping hand. And that's what Ford has in store for the Consumer Electronics Show opening next week in Las Vegas.
Ford has essentially taken its C-Max Energi plug-in hybrid and fitted it with the latest in solar panel technology developed by SunPower, acting like a magnifying glass to capture as much of the sun's energy as possible. So you get the benefit of an electric vehicle, with the range assurance of a hybrid, without needing to draw from the grid.
Ford estimates that a day of charging in the sunshine will give the C-Max Solar Energi concept the same full charge as the production PHEV, with a total range of 620 miles - 21 of which can be run on electric power alone. Otherwise the vehicle - which remains a concept for the time being - is identical to the existing C-Max Energi. The top-selling model in Ford's growing hybrid and electric vehicle portfolio helps put Ford just behind Toyota among the top seller of hybrids in America. Scope out the images in the gallery above and the video clip and press release below for a closer look.