1955 Chevrolet Bel Air Base Hardtop 2-door 4.3l on 2040-cars
Muskego, Wisconsin, United States
Body Type:Hardtop
Engine:4.3L 4343CC 265Cu. In. V8 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
Interior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: Bel Air
Trim: Base Hardtop 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: U/K
Mileage: 999,999
Exterior Color: Blue
1955 Chevy Bel-Air HARDTOP, 327 3-speed. This car needs restoration but is a very solid and complete platform. All new tune up parts, new battery, COMPLETE brand new wiring harness (mostly not installed), new rocker panels, extra "Saginaw" 4-speed trans and a bunch of other misc parts go with the car. Engine turns over with the key and I expect it to "fire" by time of sale. Interior looks to be out of a mid-late 60's Impala in decent shape with some seam splitting as seen in the pics. Will need door glass on both sides and does have rock chip in windshield. Its getting harder and harder to find complete 55 hardtop!
Additional high res pics can be seen here: http://www.forthemomentsphotography.com/Other/ForSale/55-Bel-Air-Hardtop/
Will sell to lower 48 United States only. Buyer pays all shipping costs. $500 non-refundable deposit due within 48 hours of end of auction. Do not bid if you cannot pay.
Call 414-333-0686 for more information. Car located just southwest of Milwaukee, Wisconsin. I reserve the right to end auction early as the car is for sale locally.
Chevrolet Bel Air/150/210 for Sale
- True ls6 454 tremec 5-speed 4-wheel disc vintage air bagged ostrich leather
- 1956 chevrolet bel air/150/210
- 1955 chevy chevrolet pro street car(US $45,000.00)
- 1955 chevrolet bel air base hardtop 2-door 4.3l
- 1957 chevy 210, 4 door, 245hp, 2x4 carbs, 700r4 trans
- 1957 chevy belair 2 door ht(US $15,000.00)
Auto Services in Wisconsin
Versus Paint & Collision ★★★★★
U S Speed Research ★★★★★
Topel`s Towing & Repair Inc ★★★★★
Tj`s Auto Body ★★★★★
Swant Graber Ford ★★★★★
Sebring Garage ★★★★★
Auto blog
GM recalling 118K Colorado, Canyon pickups over missing hood latches
Thu, 20 Dec 2012General Motors has announced a recall of 118,800 Chevrolet Colorado and GMC Canyon pickup trucks due to the possibility of secondary hood latches not being installed at the time of manufacture. The affected vehicles are from the 2010, 2011 and 2012 model years, all of which were built between November 9, 2009 and August 28, 2012.
According to the official National Highway Traffic Safety Administration report, these trucks fail to "comply with the requirements of Federal Motor Vehicle Safety Standard No. 113, 'Hood Latch System.' The hood may be missing the secondary hood latch." In other words, owners of these trucks could find their vehicles' hoods opening unexpectedly while driving.
The official recall campaign is expected to begin on January 17, 2013. Dealers will inspect the affected pickups and if a secondary hood latch is not present, one will be installed free of charge. Scroll down to read the official NHTSA report.
Next Corvette ZR1 to get 700 horsepower?
Tue, 19 Feb 2013Word has it General Motors may offer as much as 700 horsepower in the C7 Corvette ZR1. Motor Trend reports the next Corvette Z06 will continue to rely on its naturally aspirated 7.0-liter V8 engine for thrust, but the lump will deliver substantially more power. How much more? MT says the engine could deliver up to 600 ponies. That's a jump of 95 horsepower over the current Z06, though no figures have been finalized as of yet. Right now, GM is reportedly waiting to see what sort of grunt it can glean from the next ZR1.
The automaker has already made it clear it will resurrect the LT5 name for the new supercharged V8, and if GM is already pulling 600 from the Z06, the big dog ZR1 would theoretically offer 700 horsepower. Either way, the range-topping Corvette will be suitably insulated from its less potent siblings. Stay tuned. We aren't likely to see the Z06 for at least a year, with the ZR1 trailing along at some point there after.
More Corvette Stingray Factoids: Vanishing panel gaps and 26-mpg LT1
Thu, 28 Feb 2013During January's Detroit Auto Show, we managed a longer than expected wandering tag-team interview with C7 Corvette chief engineering exec Tadge Juechter (pictured above), and LT1 engine boss Jordan Lee (pictured below). They are, quite honestly, two of the very nicest bigshot lads to ever walk the engineering corridors of an American manufacturer. Both are enthralled by what they're doing for a day job. So are we.
We've followed the pre-sale anticipation for the Chevrolet C7 Corvette Stingray like an Oreck vacuum yanking every speck of dirt from a well-trampled carpet. Everything is reportable and contains a grain of further knowledge about this dramatically important and cheered-for car, as it continues to be pressured into representing all that is superior about the American dream. The Corvette wears one heavy cloak.
So, most of what was talked about has been expertly reported already right here on Autoblog. But, looking through our notes again, both Jeuchter and Lee added facts to the buzzing mix.