No Reserve Flood Salvage Rebuildable Rolls Royce Mulsanne on 2040-cars

Auto blog

Bentley Continental GT3-R is a limited-edition racer for the street

Limited to just 300 examples worldwide, Bentley's new GT3-R is set to bring a bit of the brand's motorsports pedigree to the street. After all, the Flying B recently took the win at the Blancpain Endurance Series at Silverstone with its new Continental GT3, less than one year after the big racer's debut.
Like the road-going Conti GT, the GT3-R uses a twin-turbocharged 4.0-liter V8, tuned in this application to 572 horsepower and 516 pound-feet of torque - increases of 51 hp and 14 lb-ft from the already potent GT V8 S. That's enough to get the 4,839-pound Bentley to 60 miles per hour in just 3.6 seconds, on its way to a top end of 170 mph.
To make the GT3-R more hardcore than standard Continentals, the air suspension has been retuned, the brakes have been upgraded with carbon silicon discs, and there's a titanium exhaust that's good for 15 pounds of weight-savings - in all, the GT3-R is some 200 pounds lighter than a comparable GT V8 S.

Bentley, Lamborghini consider foreign production [w/poll]

Would a Bentley be a Bentley if it weren't manufactured in Great Britain? Would a Lamborghini be a Lamborghini if it were built outside of Italy? It may be hard to say either way, but we might find out sooner than later, because the latest word coming in from Europe is that the Volkswagen Group is considering expanding production for both these upscale brands outside their traditional homes.
According to the Autovisie section of Dutch newspaper De Telegraaf, the issue for both automakers comes down to their ambitious expansion programs. Both Bentley and Lamborghini plan to launch new SUVs - the former's being well under way, the latter's still awaiting approval - that would expand their annual production considerably: by 50 percent in Bentley's case, and by as much as 100 percent in Lamborghini's.
For now, both marques intend to handle the added production with additional assembly lines at their current facilities in Crewe and Sant'Agata Bolognese, respectively. But both could soon outgrow their relatively small plants - and with the Volkswagen Group operating countless factories across Europe and around the world, it wouldn't be hard to see these manufacturers shifting excess production outside of their home countries.

Bentley releases new details on Continental GT3 racer

Porsche's new LMP1 Prototype isn't the only motorsports news coming out of Volkswagen AG this week. After unveiling its new Continental GT3 at the Paris Motor Show last year, Bentley has released some new images and details as this racecar continues its development. Similar to the Porsche announcement, Bentley's new GT3 marks a significant return to motorsports, only in this case, Bentley hasn't raced a car since 2003 - a winning effort at the 24 Hours of Le Mans.
From street to race form, the Continental has dropped about 2,200 pounds by shedding many of the luxury and tech features that make the street-legal Continental GT the car that it is - including 50(!) electronic control units. The Continental GT3 uses the same 4.0-liter, twin-turbo V8 as the road car, but we're guessing output has been tweaked a bit from the standard 500 horsepower. Except for the carbon fiber hood, decklid and doors, Bentley says that the body of the GT3 is a direct carryover from the Continental GT.
Inside, even a stripped interior and full roll cage won't stop Bentley from being Bentley as it gives this racecar the same attention to detail as its road cars - the seats, steering wheel and door pulls all receiving the hand-crafted treatment from the factory in Crewe. There is no word as to when the Continental GT3 will make its racing debut, but more details about the car can be found below in the official press release.