Find or Sell Used Cars, Trucks, and SUVs in USA

1998 Bmw Z3 M Roadster Convertible 2-door 3.2l on 2040-cars

US $24,999.00
Year:1998 Mileage:31700
Location:

Hudson, Quebec, Canada

Hudson, Quebec, Canada

 -One of the most collectible BMW M's, the 1998 M-Roadster was THE FIRST M in a Roadster body, with quad pipes, a signature since standard on all M's, whether they have 6-8-10 or 12 cylinders
-It is (mechanically) based on the VENERABLE E36 M3, a piece of automotive history! For the first 3 years, also features the S52 engine, also a piece of history; possibly the best 6 cylinder of all time. DINAN produced over 500hp from these with no compromise on reliability! Way more complexity was introduced with the S54, which was eventually phased out and replaced by the current V8 (on M3's);  most experienced BMW techs would rather own/maintain/tune a S52.
-It has little in common with the standard Z3, as it sits lower, is substantially wider, and nearly every chassis component and brakes are vastly improved
-It was THE FASTEST PRODUCTION BMW EVER when introduced, and will GUARANTEE a smile on your face every time you take it out!
-North American version electronically limited to 220km/h

Auto blog

BMW Concept Active Tourer Outdoor enjoys a day in the sun

Wed, 10 Jul 2013

This BMW Concept Active Tourer has evolved for the nature and cycling set and premiered at OutDoor Friedrichshafen, a trade fair in held this month in Germany. The sturdy wagon is tweaked with new materials, accessories and ConnectedDrive features for those who do a lot of their living under the sky as opposed to inside their cars.
Under the hood is the same plug-in hybrid drive system we've were introduced to in 2012, featuring a transversely-mounted, 1.5-liter turbocharged three-cylinder engine paired with an electric motor and a battery pack under the rear compartment floor. Total output is 190 horsepower and 147 pound-feet of torque headed to the front wheels, a claimed time from zero to 62 of under eight seconds, a pure electric range of up to 19 miles, a top speed of 124 miles per hour and claimed fuel economy of around 95 US miles per gallon.
The space behind the rear seats is the showcase, with a transformable compartment that can stow two bikes on built-in, retractable carriers. Remove the front wheel and seat from the bikes, then the frames can be locked into place using two rails and brackets. The wheels can be stowed in a holder attached to the right rear seat, the saddles can go into a compartment in the load floor. If you need to make a quick adjustment or a fix, you can do so since the bikes are aligned across the load bay.

Researchers halfway to cutting carbon fiber costs by 90%

Wed, 15 Oct 2014

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.

BMW to follow Honda back into F1?

Mon, 14 Apr 2014

The economic downturn wrought devastating effects on motor racing. Formula One alone lost half its engine suppliers when Honda left at the end of the 2008 season, and both BMW and Toyota followed at the end of 2009. But things are looking up again. Cosworth may have dropped out this season, reducing the engine suppliers to three: Ferrari, Renault and Mercedes, the latter of which admits that it may have left had the engine formula not changed. But Mercedes has stayed and is dominating the championship. Honda is coming back next season. And word around the paddock is it may not be the only one.
According to Giancarlo Minardi - founder of the team now known as Scuderia Toro Rosso - BMW engineers have been conspicuously spotted lately at F1 test sessions and grands prix, lending to speculation that the new engine regulations may entice the Bavarian automaker back into the series. According to Minardi, BMW's marketing division is pushing for the automaker's return to F1, with the board slated to make a decision in May. BMW would be more likely to consider an engine-supply deal rather than taking a team over like it had with Sauber, but with which team or teams it might collaborate remains a big question mark at this point.
As if that's not enough, Ford is said to be considering taking over Cosworth's aborted V6 turbo engine program to take both outfits back into the sport as well. Cosworth supplied F1 engines under the Ford banner for years, but returned under its own name for four seasons from 2010 through 2013 before shuttering its program to develop an engine to meet the new regulations adopted this season.