1998 Bmw Z3 Roadster Convertible 2-door 1.9l on 2040-cars

Auto blog

BMW X4 M40i caught production-ready

It seems like BMW is pretty committed to this whole X4 thing. Aside from the current xDrive28i and xDrive35i, we've captured a round of spy photos showing what our spy shooters tell us is a more dynamic M40i model.
The higher-performance hunchback follows in the footsteps of BMW's other sub-M cars like the M235i. In fact, much like the high-po 2 Series, the M40i is expected to make use of a 3.0-liter, turbocharged six-cylinder, developing 365 to 375 horsepower.
Aside from that, the rest of the X4 M40i fits the brief of other near-M models, with a more aggressive body kit, larger wheels, firmer suspension and brawnier brakes. Expect some mild tweaks inside, too, including sportier seats and an M-specific steering wheel.

Meet the inventor of the BMW 3 Series wagon

It's hard to imagine, but once upon a time, there were only two BMW 3 Series variants: the coupe and sedan. Back before gran coupes, convertibles and yes, even touring models were available, buyers could only get their 3 Series fix if it came with two or four doors and a fixed roof. Back in the mid '80s, BMW engineer Max Reisbock was having some trouble fitting his whole family into his four door. Rather than suck it up and buy a van, he picked up a wrecked 3 Series and got to cutting in a buddy's garage. Months later, he had the very first 3 Series Touring ever built.
At first, he kept the the car to himself, using it to haul friends and family around, but he eventually showed it off to his friends at work. When the BMW executives found out about his project, they called him up to take a closer look. After putting an eyeball on the car, they took it, copied his design, made a few tweaks and quickly rolled out the first production 3 Series Touring. How's that for validation? Check out the video below for Reisbock's story.

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.