1998 Bmw M3 E36 Convertible - Only 62k Miles! on 2040-cars

Auto blog

BMW adds new entry-level 320i model, priced from $33,445*

Fans of the new BMW 3 Series here in the US have likely been waiting for one of two models to arrive: the new M3 or the diesel-powered 335d. Well... keep waiting just a little bit longer. Here at the Detroit Auto Show, BMW is showing off the new entry-level 320i that will join the 3 Series lineup this spring, and rather than bringing added performance or efficiency, this car is boasting affordability above all. The 320i has been on sale in other markets since the current-generation 3 Series was introduced, but it goes on sale in the US with a starting price of $33,445 (*)including $895 for destination, which is $3,405 less than the current starting price of BMW's well-liked sedan.
In other countries, the 320i uses either a 1.5- or a 2.0-liter inline-four (both turbocharged), and the US version of the car will be getting the latter engine producing 180 horsepower and 200 pound-feet of torque. For comparison, the current 328i, which uses this same engine, produces 240 hp and 255 lb-ft of torque. As expected, performance of the 320i will suffer with BMW estimating a 0-60 mile-per-hour time of 7.1 seconds, but it still has the same 130 mph top speed as the 328i. Oddly enough, despite the lower output, BMW's expected fuel economy for the 320i equipped with rear-wheel-drive and the eight-speed automatic transmission actually matches that of the current 328i with 23 miles per gallon city and 33 mpg highway, and those numbers are actually lower than the 328i with the manual gearbox.
It sounds like most of the usual 3 Series options will be available on the budget-minded 320i, including the choice of xDrive all-wheel drive, BMW Assist and numerous packages including a Sport pack and Premium pack. For a lot more information on the 320i, most of it general information on the F30 3 Series, scroll down for BMW's press release.

2015 BMW X4 slides in on the diagonal starting at $45,625 in the US

If BMW has shown us anything, it's a knack for creating niches and expanding its product portfolio. Go back to the early '90s and it had essentially four models: the 3 Series, 5 Series, 6 Series and 7 Series. End of list. Since then, the Bavarian automaker has not only taken on Mini and Rolls-Royce, but has expanded its own range of models exponentially. You can chalk a big part of that up to crossovers, and another sizable chunk to giving existing models a different roofline and calling it something new. What we have here is a prime example of both.
Previewed in concept form the better part of a year ago at the Shanghai Motor Show, the slantback version of the X3 (and the baby brother to the X6) is now here in full production guise. Mechanically it's essentially the same as the new X3 on which it's based, but amps up the "sport" at the expense of the "utility" part of the SUV equation.
BMW will undoubtedly offer a wide range of powertrain configurations in markets around the world, but back in the United States it'll be offered in two specs: the X4 xDrive28i, packing a 2.0-liter inline-four with 240 horsepower and a $45,625 sticker price (including destination), or the X4 xDrive35i with the 300hp 3.0-liter six and a $48,925 MSRP. Either way, you're getting an eight-speed automatic and all-wheel drive.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.