2010 Bmw 328i Coupe Extra Clean! Bmw Warranty And Maintenance on 2040-cars

Auto blog

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.

BMW to change model designations, further yet from actual displacement?

Once upon a time, you could look at the back of a trunk lid of a BMW and come up with a pretty fair idea of what sat under its hood. For example, a 320i was a 3 Series with a fuel-injected, 2.0-liter engine, a 328i was a 3 Series with a fuel-injected, 2.8-liter engine and a 328Ci was a two-door 3 Series with the same engine. Those were good days.
Today, though, that simplicity is dead and gone. A 328i now has a 2.0-liter engine, just like the 320i, while the simple "C" designation that was affixed to two-door models has been replaced with a "4," so we have a 428i and a 435i. It gets worse, though. A 550i uses a 4.4-liter, twin-turbocharged V8 (it should be a 544ti, although we'd be willing to hear an argument for "tti") and a 740i uses a 3.0-liter, turbocharged six-cylinder, which is the same engine found in a 535i. It's madness.
And, well, it's about to get madder, if a post on a BMW enthusiast forum is to be believed. According to f30post.com, we could see a shakeup in at least the 3 and 4 Series nomenclature, thanks to an impending refresh that will see the addition of new, turbocharged four- and six-cylinder engines, codenamed B48 and B58, respectively.

BMW and Mini shuffle NA management, McDowell to retire

BMW and Mini recently shuffled top personnel in their design departments, and now BMW of North America will reorganize its management to improve customer relations. Peter Miles (pictured), currently the executive vice president of operations, will take a newly created position, vice president of sales channel development and customer relations, while Jim McDowell, vice president of Mini of the Americas, will retire.
Chris Koenders, president of BMW Group Netherlands, will move take Miles' spot as executive vice president of operations. David Duncan, western region vice president, will take McDowell's job as vice president of Mini of the Americas. Finishing off the management switcharoo is Peter Witt, who will move from his current position as Managing Director of BMW Sweden to take Duncan's job as western region vice president.
"We are intensifying our customer-driven focus and these changes will influence the entire organization to continue improving all phases of the customer journey from prospect to purchase and throughout the ownership cycle," says Ludwig Willisch, president and CEO of BMW NA. For more information on the management reorganization, check out the press release below.