Find or Sell Used Cars, Trucks, and SUVs in USA

1932 Ford Pickup Flathead Motor on 2040-cars

US $19,500.00
Year:1932 Mileage:987654
Location:

Idaho Falls, Idaho, United States

Idaho Falls, Idaho, United States
Body Type:Pickup Truck
Engine:flathead 8BA
Vehicle Title:Rebuilt, Rebuildable & Reconstructed
For Sale By:Private Seller
Condition:

Used

VIN (Vehicle Identification Number)
: 18821009
Year: 1932
Mileage: 987,654
Make: Ford
Sub Model: standard
Model: Other Pickups
Number of Cylinders: 8
Trim: standard pickup
Drive Type: auto C4

As you can see from the pictures, this pickup is in bare steel except for a few spots in black primer.  There is a thin skim of bond under the primer.  You can check the condition of the metal from the back side.  The pickup is all steel, the body and box are original; the hood and grill shell are after market, and the grill insert is original.  The box has been shortened and the dash has been customized.  The door latches and window regulators are in excellent condition.  It has an excellent windshield frame and excellent garnish moldings.  The front suspension is new from Speedway Motors, it has a 4 inch drop, disk brakes and new wishbones.  The rear suspension is a Ford 8 inch with triangulated 4 bar and coil overs from Pete and Jake.  The Frame is new with rails and boxing from American Stamping and cross members from Pete and Jake.  The radiator is a new all brass from Walker Radiator.  The engine is a low milage Ford 8BA flathead.  The tranny is a rebuilt Ford C 4 with a new Lokar shifter.  The wheels are new from Vintique with new tires.  I just installed the windshield glass and I plan to install the side and rear glass soon. You may contact me at  vandel@cableone.net  I would be glad to visit with anyone via email or phone about this pickup.  I have done all of the frame, drive trane and suspension work.  The sheet metal work was done by the prior owner.  It is licensed and insured and I have driven it several times.

rev1898 please contact me.

Auto Services in Idaho

Windshield Rescue Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Windshield Repair
Address: 295 S Holmes Ave, Rigby
Phone: (866) 290-4620

Union Gospel Mission Motors ★★★★★

Auto Repair & Service, Used Car Dealers
Address: 7219 E Sprague Ave, Hauser
Phone: (509) 327-4357

S & D Automotive ★★★★★

Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: 139 Blue Lakes Blvd S, Filer
Phone: (208) 734-2267

Oakley-Moody Svc Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Diagnostic Service
Address: 1375 W Grove St, Eagle
Phone: (208) 343-4697

Meridian Automotive ★★★★★

Auto Repair & Service
Address: 505 N Main St, Meridian
Phone: (208) 888-3797

John`s 24/7 Towing & Recovery LLC ★★★★★

Auto Repair & Service, Towing, Automotive Roadside Service
Address: 64 Old Crouch Rd, Pioneerville
Phone: (208) 462-2833

Auto blog

Car companies used to cook up sales with recipe books

Fri, 08 Aug 2014

The evolution of automotive marketing has undergone a number of strange phases. Few, though, match the strangeness of the 1930s to 1950s, when automotive marketers turned to cookbooks as a means of promoting their vehicles. Yes, cookbooks. We can't make this stuff up, folks.
This bizarre trend led to General Motors distributing cookbooks under the guise of its then-subsidiary Frigidaire. Ford, meanwhile, offered a compilation of recipes from Ford Credit Employees (shown above). The cookbook-craze wasn't limited to domestic manufacturers, though. As The Detroit News discovered, both Rolls-Royce and Volkswagen got in on the trend, although not until the 1970s.
The News has the full story on this strange bit of marketing. Head over and take a look.

Ford unveils its facelifted Falcon finale with new XR8

Thu, 24 Jul 2014

While its days may be numbered, Ford isn't just going to let its Falcon sedan limp out for the Australian market. No, the Blue Oval is releasing a refreshed Falcon for its final years, and it's lead by this, the new XR8. That's right, this dead-car-driving is going to go out on a high note.
Ford's global design DNA dominates the looks of the new Falcon, with a grille reminiscent of the US market Fusion and the European-market Mondeo. The headlights aren't a straight port, and boast their own unique LED running light pattern (at least on the XR8), but the overall look is strikingly similar. Out back, LED taillights highlight the rear of the Faclon. Despite the substantial new fascia, this is still a mid-cycle refresh. That means most of the rest of the Falcon's body panels are carryovers from the current model.
The XR8 model, shown above, arrives with a supercharged V8, allegedly displacing 5.0 liters. Unfortunately, details on the Falcon's mechanicals are in remarkably short supply. Ford has committed to a range of turbocharged four, as well as turbocharged and naturally aspirated six-cylinders, in addition to the V8, although specifics on those mills aren't available.

Amid Mulally rumors, Bill Ford praises company's deep bench

Wed, 02 Oct 2013

Bill Ford went on the offensive to combat the rumors that CEO Alan Mulally would leave Dearborn for Steve Ballmer's vacated position leading Microsoft, adding that even if the 68-year-old, former Boeing exec were to depart, the Ford executive team is in a good place.
"I'm happy [Mulally] is going to stick around. But we also feel really good about where we are in terms of succession," Ford told Bloomberg TV, according to Automotive News. Rumors first cropped up about Mulally leaving Ford when AllThingsD speculated that he was in the running, early last month. In that same report, which you can read here, Ford's board of directors reportedly okayed the CEO stepping down ahead of his planned retirement in 2014.
That opened the floodgates, culminating in a report from a few days ago that the rumors over Ballmer's successor just might be true. The story is especially troubling, as Ford hasn't had Mulally under contract, according to AN. "He's here as long as he and I would like it to happen," Ford said, "We're also cognizant of training the next generation and getting them ready to go as well."