1969 Ford Fairlane on 2040-cars

Auto blog

Ford Mustang hit by Moore' Oklahoma's EF5 tornado lives to do another burnout

Oklahoma recently saw the destructive power of an EF5 tornado, but in the aftermath of the devastation, we've also been witness to the incredible resilience of the human spirit. Moore, OK resident Jack Haden survived the storm but found that his 2003 Ford Mustang wasn't quite as lucky. As you can see in the image above, the tornado's 200+ mph winds did quite a number on the car, but while most people would have likely called their insurance company and scrapped the car, Haden had other plans.
After finding the car and seeing that its V6 still fired up, Haden spent a couple hours getting the car, um... roadworthy(?)... by removing the doors and front clip, cutting off the roof and putting on some new wheels and tires. He noticed that driving it around brought some comic relief to an area that needed a reason to laugh and smile. Check out the KSBI TV news report video below showing before and after pictures of the tough 'Stang, as well as a video showing the newly lightweight coupe doing a smoky burnout.

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.