1957 Ford F100 Short Bed 2wd 272 Manual 3 Speed, Brakes, And Steering on 2040-cars
Henderson, Nevada, United States
1957 Ford F-100 2WD RWD Short Bed Straight Side base model truck. I bought this in El Paso Texas last year off of eBay for a project this year that never materialized. It was purchased for a total tear down and rebuild into a bagged street rod. Motor looks to be original, frame and body numbers match. Looks to be all original frame, suspension, drive train but that is my assumption. Did not matter since it was going to be stripped down. Just needed the title and decent sheetmetal. It starts and runs, but with much anger and resistance, lol. It blows blue smoke, runs rough/misses, but idles after started. Carb is leaking out the seals but has no problem responding to the pedal and getting the motor to move the truck around. Shifts, brakes, turns... just not a street worthy vehicle at all. Great foundation for a build. Not need to stress over modifying this the way you want it! Worst part is the hood front structural bracing is rusted away... but this hood was going to be deck, angled, and rebuilt anyways for a new latching system so enough steel for that. Also the core support is solid, no rust but the latch assembly area has been rewelded and strengthened in its lifetime... but again that area was going to be reworked for the new hood setup... again no biggie for me. The rust in the cab corners, footsteps, under footwell bracing, front of bed at cab... etc... all very typical of this year truck and replacment panels are cheap and readily available. Open Texas Title. NO SHIPPING!!!! NO INTERNATIONAL BUYERS!!! Buyer is responsible for vehicle pickup. SOLD AS IS NO WARRANTY NO RETURNS NO SCAMS!
**** V i d e o link of the engine running **** some people have asked about it. It starts, runs, idles... but would need a rebuild. |
Ford F-100 for Sale
- 1956 ford truck street rod pro tour(US $35,000.00)
- 1955 ford f-500 fire engine - 1,457 documented miles - true survivor - like new(US $25,900.00)
- 1963 ford f-100(US $2,500.00)
- 1939 ford f-100 85% restored! extremely rare vehicle! excellent condition!(US $23,500.00)
- 1971 ford f100 ranger short bed 302 v8 automatic
- 1956 ford f-100
Auto Services in Nevada
Vince`s Automotive ★★★★★
Used Cars For Sale ★★★★★
Toyota Auto Repair ★★★★★
The Body Shop of Reno Sparks Collision Repair Specialists ★★★★★
Team Acme Inc. ★★★★★
Superior Tire ★★★★★
Auto blog
Ford Mustang hit by Moore' Oklahoma's EF5 tornado lives to do another burnout
Fri, 07 Jun 2013Oklahoma recently saw the destructive power of an EF5 tornado, but in the aftermath of the devastation, we've also been witness to the incredible resilience of the human spirit. Moore, OK resident Jack Haden survived the storm but found that his 2003 Ford Mustang wasn't quite as lucky. As you can see in the image above, the tornado's 200+ mph winds did quite a number on the car, but while most people would have likely called their insurance company and scrapped the car, Haden had other plans.
After finding the car and seeing that its V6 still fired up, Haden spent a couple hours getting the car, um... roadworthy(?)... by removing the doors and front clip, cutting off the roof and putting on some new wheels and tires. He noticed that driving it around brought some comic relief to an area that needed a reason to laugh and smile. Check out the KSBI TV news report video below showing before and after pictures of the tough 'Stang, as well as a video showing the newly lightweight coupe doing a smoky burnout.
Ford F-150 bumps Camry from top of Cars.com American Made Index
Tue, 25 Jun 2013With July 4th just around the corner, what better time could there be for Cars.com to announce that the Ford F-150 is the Most American car of 2013? This may be especially true since it was the Toyota Camry, a car produced by a company based in Japan, that had held the top spot from 2009 to 2012.
Cars.com compiles its Most American list by considering the amount of parts each vehicle uses that come from America, where it's final assembly takes place and how many units per year are sold. "While the assembly point and domestic parts content of the F-150 didn't change from 2012-2013, vehicle sales are responsible for bumping the F-150 to the top spot," according to Patrick Olsen, Editor-in-Chief of Cars.com.
As far as automakers go (as opposed to individual models), Toyota retains the top spot it held in 2012, with General Motors, Chrysler, Ford and Honda (in that order) rounding out the list. The motivation behind this list each year, according to Olsen, is "to help car shoppers understand that 'American-Made' extends beyond just the Detroit three" and because "a study we conducted in 2012 indicated that 25 percent of shoppers surveyed preferred to buy American."
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.