Ford Crown Victoria N/a on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Watch Tanner Foust hustle the Fiesta ST 'round the 'Ring

The last time we saw Tanner Foust at the Nürburgring he was sloshing an SVT Raptor from kerb to kerb. Sticking with Ford but swapping keys, this time the drift champion and Top Gear USA host goes to the opposite end of the manufacturer's tuner garage and plucks a Fiesta ST for 'Ring duty.
The 179-horsepower front-wheel-driver acquits itself well by the end of the video. But be warned, Foust doesn't set a 'Ring time and it's shot like a commercial... because that's what it is. Still, you can enjoy all two minutes and 31 seconds of it below.

Ford's Explorer-based Police Interceptor to get 365-hp EcoBoost option

Speeders beware, the police are going to be getting quite a bit faster. Ford has just announced that it will be offering its 3.5-liter, twin-turbocharged, EcoBoost V6 in the Explorer Police Interceptor. The new engine will be joining the existing 3.7-liter V6. The 365-horsepower, 350-pound-foot mill should be familiar to consumers as the powerplant that's found in the Ford Taurus SHO (and its LEO equivalent, the Taurus Police Interceptor) and the Ford Explorer Sport. It should also provide quite a kick in the pants to officers used to the naturally aspirated 3.7 and its 304 ponies and 279 pound-feet of torque.
The move to the more potent powerplant was born out of all the equipment officers need to carry on a day-to-day basis. These days, there's so much stuff that police need on a regular basis, that there's a genuine market for a faster Police Interceptor Utility, as it's known officially. The Explorer-based cruiser has already accounted for 68 percent of Ford's LEO sales in 2013, and that's with just the 3.7, and we'd only expect that number to increase once the twin-turbo, 3.5-liter V6 is available. Ford won't offer up any indication of what the take rate will be on the new engine, but we're guessing it'll be fairly high.
The success of the Explorer PI couldn't have come at a better time for Ford. The decision to end Crown Victoria production was not a popular one with police, and combined with Chevrolet and Dodge diving into the LEO market feet first, Ford hasn't been performing as well as it's wanted to. The Explorer has been helping it turn around, though. And with the inclusion of the EcoBoost, Ford also has a legit competitor for the Chevrolet Tahoe on the big utility side of the police market.