2006 Ford Crown Victoria Police Interceptor Sedan 4-door 4.6l on 2040-cars
Mount Vernon, Ohio, United States
Body Type:Sedan
Engine:4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
Used
Year: 2006
Mileage: 128,360
Make: Ford
Number of Cylinders: 8
Model: Crown Victoria
Trim: Police Interceptor Sedan 4-Door
Drive Type: RWD
Up for sale is my 2006 Ford Crown Victoria Police Interceptor Options on this car include: Heavy duty springs, shocks, stabilizer bars, high output alternator, 3.27 trac-lok, air conditioning/defrost, power door locks and windows, express window switch, window lock, driver lumbar, bucket seats, full size spare on unused tire, anti-lock brakes, driver/passenger airbags, light bar connector and engine idle meter. This Crown Victoria came with the 750A-STR APR 327 Package - It is equipped with the Street Appearance Package and includes color keyed door moldings, chrome grille, chrome door handles, body color rear fascia, 17" hubcaps, full carpet, cruise control, driver passenger side airbags, 8 way drivers seat, 50/50 cloth/vinyl front and rear seats, ticket light. Car was ordered through Ford and shipped to Raleigh, NC where it was assigned to the drug unit in Wilmington, NC. Car has factory order tag 1005-728606/20/05NC and is a true police interceptor. 1 assigned officer and serviced every 3000 miles. The car has never had any decals, lightbars, or antennas. Condition: Paint is good, factory dark blue pearl (DX), has faint scratches here and there. There is a 6" crack in rear bumper. 4 1/16" holes inside trunk from strobe module. Paint has had touch up under hood, around trunk, door moldings, and around c-pillar. Tires are at 80% all around. Interior is in good condition, no headliner indents, no tears in seats, no cuts in carpet - Dash has 2 holes on right side of steering wheel, 3 1/16" holes on right side of front headliner. Car runs good and accelerates fast. Shifts are smooth and tight, steering is very responsive. Undercarriage has NO rust at all - All factory paint label/marks are present and all factory stickers are in place. Recent service for 125000 mile checklist included new oil, new filter, new transmission fluid, new transmission filter, new rear end fluid, new rear end gasket, new Motorcraft A/C condenser, new coolant, new A/C line O-rings, new trans line O-rings, and A/C recharged. Car will need front lower ball joint within next 10000 miles - 2 New motorcraft ball joints included - no time to install. Paperwork that comes with car: Title, Carfax, Dealer option sheet, service log, factory manuals Located in Mount Vernon, OH 43050. Fly in to Columbus, OH and drive home. Price includes pick-up, temp tag, and full tank of gas Car has 128360 miles, 2299 hours - Car has seen 80% highway use and 20% rural roads, very little city use at all Autocheck is false - 1st owner was city of Wilmington, NC. 2nd was myself, can be verified by carfax Strobes are still in place in all 4 corners of the car, All modules are there along with the wires - Everything has been disconnected but can be redone for law enforcement/fire/ems personnel |
Ford Crown Victoria for Sale
- 2008 ford crown victoria police interceptor sedan 4-door with lights & sirens(US $13,995.00)
- 2000 ford crown vic police
- 2008 ford crown victoria police interceptor sedan 4-door with lights & sirens(US $10,995.00)
- P71 police interceptor!!! heavy duty equipped, high performance handling!!(US $3,500.00)
- 2010 ford crown victoria police interceptor sedan 4-door 4.6l
- 1988 ford crown victoria one owner!!!! original.. low miles
Auto Services in Ohio
Williams Auto Parts Inc ★★★★★
Wagner Subaru ★★★★★
USA Tire & Auto Service Center ★★★★★
Toyota-Metro Toyota ★★★★★
Top Value Car & Truck Service ★★★★★
Tire Discounters Inc ★★★★★
Auto blog
Ford Focus RS ready to make our hot hatch dreams real
Fri, 17 Oct 2014Ford's current hot hatch siblings the Fiesta ST and Focus ST are already two pretty great entries into the segment, but there's always a desire for a little more. Thankfully, it looks like the Blue Oval is ready to satiate that need because it's continuing to test the even more powerful Focus RS around Europe. According to our spy shooters, these shots come from near the Nürburgring.
As with previous photos, Ford engineers continue to heavily camouflage the front end of the RS prototypes, but there's a big difference here. Unlike earlier ones, this example appears to have a closer-to-production-ready front bumper rather than just a horizontal strip for the license plate. That may point to development getting somewhat closer to wrapping up. Although, this one lacks the larger rear wing from prior testers, and the exhaust also appears to be a work in progress with the rear diffuser covered in mesh in these latest shots.
The RS is rumored to be using the 2.3-liter turbocharged four-cylinder from the 2015 Mustang, but power is reportedly turned up from 310 horsepower in the 'Stang to somewhere between 325 hp and 350 hp for the Focus. Routing all that just through the front wheels could be a recipe for serious torque steer, and all-wheel drive is potentially being used for better traction.
How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150
Tue, 21 Jan 2014Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.
Next Ford F-150 delayed for aluminum body panel issues?
Wed, 11 Dec 2013The timetable for next-generation Ford F-150 may be in trouble if a report from The Truth About Cars is true. The next F-150 is slated to make extensive use of weight-saving aluminum in its body, but the aluminum alloy provided by suppliers hasn't met Ford's requirements in the earliest phases of pre-production, according to the report.
The F-150 represents a huge portion of Ford's profits and is the best-selling truck in the US, even in the face of increased pressure from cross-town rivals General Motors and Ram. While the current truck is treading water against its competition, we'd be lying if we said the F-150 weren't growing quite long in the tooth.
If production of the next-generation of the Ford cash cow, said to be based on the Atlas Concept from the 2013 Detroit Auto Show (pictured above), is delayed, it could be bad for Ford. Production at Ford's Dearborn Truck Plant is already set to be delayed six to ten weeks, missing an internal on-sale deadline of Memorial Day.
2040Cars.com © 2012-2024. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.032 s, 7261 u