1957 Volkswagen Beetle Sedan Classic, Totally Restored To Original Conditions on 2040-cars

Auto blog

Volkswagen Golf R 400 Concept is a 201-mph hot hatch

This, friends, is what happens when you shoehorn 395 horsepower into a Golf. You get a three-door hatch that will happily scurry to 62 miles per hour in 3.9 seconds and on to a top speed of 201 mph. Oh yes, we like you, Golf R 400 Concept.
As we explained in our original post, the R 400 is the long-awaited successor to bonkers Golf creations like the GTI W12 from 2007 and, more recently, the Design Vision GTI. It's powered by the same 2.0-liter, turbocharged four-cylinder found in a number of Volkswagen (and Audi, SEAT and Skoda) products, although it's been heavily massaged to pump out 332 pound-feet of torque along side its amplified horsepower.
Naturally, it's been lowered and now rides on 19-inch wheels. Outside of those changes, though, mums the word on suspension and chassis enhancements. While this is a bummer, the striking looks of the Golf R 400 more than make up for it.

VW readying new VR6 with forced induction

Volkswagen built a stonking, narrow-angle V6 in the 1980s and 1990s that was found in three different generations of the Golf (their performance iterations, obviously), three generations of the Passat, the New Beetle, the Corrado and the Touareg, among other VWs, a spate of Audis, Seats, a Skoda, and even the Porsche Cayenne. It was a sad day when it was announced that it'd be put out to pasture.
Rejoice, though, fans of the venerable VR6, because Volkswagen has a new, modern variant in the works that, according to AutoWeek, features direct injection and can easily be fitted with forced induction. In fact, AW mentions Volkswagen insiders that claim this unit will spawn a production version of the twin-turbo V6 shown on the Design Vision GTI from this year's Wörthersee festival. That unit produced an epic 503 horsepower and 413 pound-feet of torque.
Don't expect a production unit with that level of power (although it would make a hardy RS4 powerplant), though. In reality, AutoWeek is suspecting anywhere from 340 to 450 horsepower from the new mill. When it arrives at an undisclosed date in the future, it'll likely be found in the Passat and Passat CC as well as the production version of the CrossBlue.

An inside look at VW's new California R&D center

Less than two months ago, the Volkswagen Group opened a new facility in Oxnard, California (about an hour's drive west of Los Angeles). The $27 million investment, touted as Test Center California (TCC), serves as a research and development lab testing emissions for all brands under Volkswagen's umbrella, including its newest member, Porsche. While still not fully operational, we toured the new 64,000-square-foot building last week and had a first-hand opportunity to see just how much work is involved testing engines and meeting increasingly stringent government emissions standards.
Replacing a similar facility established in 1990 in Westlake Village (about 20-minutes east of the new location), our guide explained how Oxnard was chosen for its temperate climate, varied regional terrain for test drives and low altitude. (The area is only a few feet above sea level - a critical parameter when instrument testing emissions.) The new facility is capable of analyzing hundreds of vehicles, prototypes and customer-owned vehicles, annually.
Most interesting to us was the huge stainless steel climate chamber, with a massive four-wheel dynamometer that allows VW to test running vehicles in both scorching desert and freezing climates without ever leaving the building (an Audi Q7 was running in place during our visit). We were also mesmerized by the countless storage tanks and intricate plumbing of chemicals, stored in both liquid and gas states, needed to perform the variety of tests. Lastly, we took a look at Bugatti's service center on the west coast, located completely within the new center. While there were no supercars on site, the facility is equipped with plenty of spare forged wheels (mounted with expensive Michelin PAX tires) and a Veyron-specific repair jig that allows the vehicle to be completely disassembled, if needed. It is a shame that the facility, which set off all of our automotive geek alerts, is closed to the public.