1999 Toyota Land Cruiser Loaded Very Very Clean on 2040-cars

Auto blog

Toyota gives dealers permission to drop Scion, shows them FR-S droptop, Juke rival first

We recently heard that Toyota could be looking to shrink its network of Scion dealerships, and now Automotive News is reporting that the automaker has officially given its dealers the green light to dump Scion without any penalties. Currently, Scion has about 1,000 dealers, yet our report from August 8 quotes an industry analyst as suggesting a healthier figure would be between 350 and 500 outlets. But before its current dealers make a decision on whether or not to get rid of the youth-oriented brand, Toyota also showed off a couple potential future products in the pipeline.
The FT-86 Open Concept shown above was revealed back in March at the Geneva Motor Show, and AN says that an FR-S convertible was driven on stage at a recent national Toyota dealer meeting in Atlanta. There has still been no definitive word one way or another as to whether the droptop model will be built, but it could be a good way to follow up to the popular FR-S coupe. Another possible future product is a subcompact crossover, which was shown in drawing form at the meeting, presumably aimed at small CUVs like the Nissan Juke and the upcoming Honda CUV based on the Fit, a model recently previewed by the automaker's Urban SUV concept.

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

NHTSA investigating 561k Toyota Prius hybrids for possible steering shaft defect

The Detroit News is reporting that the National Highway Traffic Safety Administration will investigate some 561,000 Toyota Prius models for potentially defective steering shafts. The affected hybrid models are from the 2004-2009 model years. The story indicates that NHTSA is weighing whether or not to grant a defect petition, which claims that Toyota incorrectly assembled the hatchback's steering linkage.
As of this writing, there is no recall. However, a recall based on the Prius steering shaft would be the third related to steering issues for the model since 2006. Seven years ago, Toyota recalled 170K Prius models for potential cracking of the intermediate shafts, and in November of 2012, the automaker recalled 670K units to replace the steering shaft extension assembly.
We'll be monitoring NHTSA's signals to see if this investigation turns into a full-fledged recall. For now, stay tuned.