2011 Toyota Highlander Se Awd Leather Sunroof Nav 23k Texas Direct Auto on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Toyota Me.We concept is a multifunction Tupperware car [w/video]

Not to be outdone by the Renault Twin'Z concept penned by Welsh designer Ross Lovegrove, Toyota has partnered up with French designer Jean-Marie Massaud to create the 2013 Toyota Me.We Concept. Unveiled at Le Rendez-vous Toyota in Paris, the Me.We Concept is an attempt to imagine a car that can be appreciated by owners across a wide variety of lifestyles while being courteous to the environment, too.
From a "Me" perspective, the concept is highly customizable with removable body panels, and even though it might look like just a small hatchback from the outside, Toyota claims it can also be used as a pickup (with an extendable rear panel), a convertible (with a neoprene roof panel) and even an off-road vehicle. As for the "We" part of the car, it's a fully electric vehicle with individual in-wheel motors and a battery pack mounted under the load floor. The concept has a weight of around 1,600 pounds kept low thanks to an aluminum chassis, but it also features renewable bamboo wood for the floor in addition to the fully recyclable polypropylene exterior body panels. Scroll down to see more in an official video and to check out Toyota's official press release.

4th-gen Toyota Prius production delayed by 6 months

If you were holding off buying a new car in anticipation of the fourth-generation Toyota Prius arriving in 2015, your wait might be a little longer. Company insiders are claiming that production of the bestselling hybrid is being pushed back from spring to possibly as late as December 2015. Toyota is reportedly still making alterations to make sure everything is just right before it unleashes the all-important, efficient hatch on a waiting public.
According to unnamed sources speaking to Automotive News Europe, the main reasons for the delay aren't completely known. It's believed the engineers are still working on making the hybrid powertrain more efficient and improving the new Toyota Global Architecture modular platform. The insiders claim that the final production prototype of the Prius is still under development, and it might be November before it's finalized. From there, it usually takes around 12 months to tool up and for the first car to roll off the assembly line. It would be another year after that before the plug-in variant starts assembly. The national manager of Toyota Product Communications, Michael Kroll, told AutoblogGreen, "As you might expect, we can't comment on future product plans."
Despite the delay, some potential details have already emerged about the new hybrid. A company spokesperson recently told Autoblog via email that Toyota is engineering the next-gen Prius to have smaller, more power-dense electric motors and greater thermal efficiency. The new modular platform is also rumored reduce weight, and the changes could lead to a targeted 10 percent improvement in fuel economy.