Dodge Ram Crew Cab Slt 4x4 Cumins Diesel Custom New Lift Wheels Tires Auto Tow on 2040-cars

Auto blog

2014 Ram Promaster pricing starts at $26,030*

Looking to get back into the thick of things in the commercial van market, Chrysler has set the pricing for the Fiat Ducato-based 2014 Ram Promaster. When it goes on sale by the end of this year, the new Promaster will have prices that range from $26,030 for the Promaster 3500 chassis cab cutaway with a 136-inch wheelbase and topping out at $36,150 for the long-wheelbase, high-roof 3500 cargo van (*prices don't include the $995 destination charge).
While pricing was released for a total of 14 build configurations (including the addition of a 2500 cargo van equipped with rear windows that was not previously announced last month), Chrysler has still not announced how much it will cost to get the optional combination of the EcoDiesel engine and the six-speed automated manual transmission and if it will be available in all styles. To see the full pricing breakdown for each Promaster model and body configuration, scroll down for Chrysler's official press release.

2014 Ram Promaster recalled over stuck pedal fears

Ram's new, Fiat-derived cargo van, the ProMaster, is set to be recalled over concerns that the accelerator pedals could stick. The issue affects 9,655 ProMasters, with 7,935 vans in the US, 1,437 vehicles in Canada and 283 in Mexico.
There have been no reported injuries or crashes from the issue - according to The Detroit News, there haven't even been any customer complaints. The issue was reportedly discovered while Chrysler was testing the vehicle at its proving ground, which is what prompted the internal investigation. Still, it's unlikely that ProMaster vans will suffer from unintended acceleration issues, as each van is equipped with a brake-throttle override.
As of this writing, there's been no bulletin or activity from the National Highway Traffic Safety Administration.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.