Dodge Ram Crew Cab Cummins Diesel 4x4 6 Speed Manual Custom Lift Wheels Tires on 2040-cars

Auto blog

Ram boosts Heavy Duty truck claims for 2015 [w/video]

The heavy-duty truck segment boasts some of the tightest competition of any automotive niche in the US. Being able to tout just one best-in-class figure can be a marketing advantage over competitors, and Ram Trucks is adding one more accolade to its tally with a powertrain update for the 2015 Ram 2500 and 3500 Heavy Duty pickups. Ram now claims best-in-class ratings for torque, towing and payload, depending on configuration.
The major change comes for the 3500 HD with a boost in torque for its Cummins 6.7-liter, inline-six diesel engine. It now produces a meaty 865 pound-feet of twist, a boost of 15 lb-ft, which is the best figure in its segment, according to the company. To eek out the extra power, the mill has more aggressive fuel delivery, and the turbo has been recalibrated. Of course, more grunt would be meaningless if drivers couldn't do anything with it, and the tweaks help allow payload to grow to 7,390 pounds, up from a rating of 7,320 pounds last year. The max towing rating remains unchanged at 30,000 pounds, though.
The rest of the powertrain lineup carries over from last year. The base HD mill is the gasoline-fed 5.7-liter V8 with 383 hp and 400 lb-ft and a six-speed automatic. The next step up is a 6.4-liter V8 with 410 hp and 429 lb-ft. There are also three trims of the 6.7-liter Cummins diesel starting with 350 hp and 660 lb-ft with a six-speed manual gearbox. If buyers opt for a the 68RFE six-speed auto, they get 370 hp and 800 lb-ft. Finally, there's the updated, top-rung version with 385 hp and 865 lb-ft with an Aisin six-speed automatic transmission.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Ram recalls 30k trucks over faulty turn signals

According to the National Highway Traffic Safety Administration, Chrysler is issuing a recall of 30,197 pickup trucks in the United States, all from the 2013 model year. The affected vehicles are the Ram 1500, 2500 and 3500, all of which were built between September 9, 2012 and March 5, 2013.
The problem affects models equipped with "optional premium taillamps," and according to NHTSA, the turn signal indicator "may not flash at a double rate to give a notification to the driver of a turn signal malfunction." The report states that if a driver is unaware of a problem with the turn signals and continues to use them as normal, other vehicles on the road may not be alerted that the vehicle is turning, which increases the risk of a crash.
Other recall woes have affected the Ram line recently. In April, we reported that Ram 1500 models were being recalled due to an improper adjustment of the parking brake cable, and several thousand Heavy Duty models were being called in for engine covers that do not have as much heat resistance as they're supposed to.