New 2013 Ram 2500 4wd Crew Cab Laramie Diesel Msrp $60665 Bright White on 2040-cars

Auto blog

2014 Ram ProMaster 2500

Front-wheel drive is what sets the all-new Ram ProMaster full-size commercial van apart from its competition. In a segment still choked with thirsty, rear-wheel-drive, ladder frame, pickup truck-based cargo vans, the American automaker is introducing something entirely new - well, new to our domestic market, as Europeans will recognize Ram's fresh entrant as a made-for-USA Fiat Ducato.
While the big ProMaster doesn't have a traditional body-on-frame chassis, it isn't a pure unibody either. Consider it a hybrid of both, with a unibody cab up front and a reinforced high-strength steel subframe in the rear. The platform employs double A-arms and MacPherson struts on the front axle, while the rear uses a simple tubular beam axle. Tires are 225/75R16 at all four corners. The steering is hydraulic rack-and-pinion (allowing an impressive 36-foot turning radius) and there are disc brakes with two-piston calipers all around. It is a solid, if unsophisticated, setup.
This game-changing van, which has already arrived in showrooms with a starting price of $28,630, is propelled by either a gasoline-powered 3.6-liter Pentastar six-cylinder (280 horsepower and 258 pound-feet of torque) or a new turbocharged 3.0-liter four-cylinder diesel (174 horsepower and 295 pound-feet of torque). Ram will offer a traditional six-speed automatic or a new six-speed automated single-clutch manual transmission that drops the hydraulic linkage to improve fuel economy - details are still emerging on this unique gearbox.

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.