2014 Ram 2500 4x4, 6.4l Hemi, 6 In Pro Comp Lift, Custom Wheels/tires, Flares on 2040-cars

Auto blog

Will Nissan's Cummins deal upset Ram's marketing mojo? [w/poll]

Ram has used Cummins engines in its heavy duty trucks since 1989, and it is the only pickup truck brand to use products from the Indiana-based engine maker. With the announcement that the next Nissan Titan will also use a Cummins powerplant, and a Nissan spokesman having already said "We will definitely leverage the Cummins brand name," a piece in Automotive News wonders whether the deal will affect the way Ram markets its tie-up with Cummins.
The question really is, how intense is this competition? While it is the first time that trucks from two different brands have used Cummins engines, they'll be two different engines in two different kinds of trucks; Nissan is going to put a 5.0-liter turbodiesel in a non-heavy-duty Titan, Ram only uses its 6.7-liter, inline six-cylinder turbodiesel in heavy-duty offerings. The diesel that Ram will offer in its light-duty, half-ton 1500 is a 3.0-liter V6 EcoDiesel with 240 horsepower and 420 pound-feet of torque - compared to about 300 hp and 550 lb-ft expected from the Titan's Cummins - and its marketing so far has focused on the fuel economy gains.
If Nissan was going to prove its commitment to the segment, it had to do something compelling. If we're talking about sales competition between Ram and Nissan, Ram has sold 201,633 trucks as of July this year, up 24.2 percent, 31,314 of those sales coming last month; Nissan has sold 10,020 Titans through the end of July, down 21.1 percent, and just 1,168 in July itself. Nissan's new truck boss - who hopped there from Ram - said that buyers have asked for a powerful turbodiesel in something other than a heavy duty pickup, and from what we've read on various comment boards, the pickup truck crowd is excited about Nissan's move.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Ram flubs ProMaster cargo capacity

The Ram ProMaster is going to look a little smaller on the inside, at least by way of its specification sheets, despite the sheet metal staying the same.
When Ram originally published the cargo capacity for its van, it simply did a direct conversion from the European rating of 15 cubic meters to 530 cubic feet. However, that didn't take into account the standard way internal measurements are calculated for the US. While the trucks have been on sale since October, the automaker just noticed the problem, and it's working on a revised figure. According to Automotive News, the new carrying ability for the ProMaster is likely between 450 and 475 cubic feet.
The difference stems from two standards for measuring capacity. In Europe, the entire internal area is determined and then obstacles like seats are subtracted from it. That means areas where freight could never go, like on top of seat backs, gets included in the figure. In the US, only the area where goods could actually fit is included, which leads to lower specs with no actual change in space.