4wd 140.5" Sport New Automatic Gasoline 5.7l V8 Hemi Multi-displacement Vvt Engi on 2040-cars

Auto blog

Ram recalling over 43k Promaster and C/V Tradesman vans for separate issues

Ram has announced that it will be recalling over 43,000 vehicles as part of a pair of campaigns targeting its two main cargo haulers, the ProMaster and C/V Tradesman.
In the case of its newer offering, the 2014 ProMaster, 21,470 vehicles are being recalled so that Ram dealers can replace the head restraints. The current restraints apparently leave too large of a gap between it and the occupant's head. Of the over 21,000 vans being recalled, nearly 19,000 are in the United States while the remaining 2,500 are in the barren tundra we call Canada.
For the old C/V Tradesman, meanwhile, its recall has been prompted by an investigation into the side-curtain and thorax airbag sensors. It was found that on vehicles lacking rear climate and audio systems in the back, a gap where these components should be could "generate a resonance" that could affect the sensors' operations. 22,115 vehicles are affected, covering model years 2013 through 2015. As with the ProMaster, the vast majority of vehicles are found in the United States, while just under 4,000 are in Canada.

Chrysler's internal documents question Ram quality as workers protest

Chrysler is reportedly having a hard time ramping up production of its 2013 Ram 1500. According to The Detroit News, only 16 of the 58 trucks built at the Warren Truck Assembly Plant during the model's first hour passed final inspection. While quality eventually improved over the course of the day, just over half of the units built on Thursday were approved for shipment. Even with workers ordered to stay late to fix their mistakes, some 1,078 units remained outside the facility with defects. The problem, according to workers at the plant, is morale.
According to the report, Chrysler recently changed the shift schedule at the plant and workers are unhappy with the new situation. The new plan has workers split into three shifts, each covering four 10-hour days. With the shifts staggered, some workers now have to work nights and on Saturdays. Some employees are so upset that they've taken to protesting, though the move isn't sanctioned by the United Auto Workers.
Meanwhile, Chrysler admits there were internal issues with the launch, but that the company was able to contain them. A spokesperson has said "plant quality indicators are getting progressively better."

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.