2002 Porsche Boxster Base Convertible 2-door 2.7l on 2040-cars

Auto blog

Porsche reportedly working on new turbocharged flat-four boxer engine?

These days, we've seen just about every automaker dropping cylinders in an effort to appease tightening fuel economy and emission standards - and Porsche is no exception. Nearly three years after introducing an all-new V6 powerplant under the front hood of its Panamera sedan (launched with a range of V8 engines) comes word that Porsche is working on an all-new turbocharged flat-four boxer to replace the flat-six engines mid-mounted in its Cayman and Boxster models.
Specifics have yet to be learned, but reports say the engine is a derivative of the current 3.8-liter six (shown above) found under the rear decklid of the Carrera S, yet with two fewer cylinders. Fitted with a turbocharger, direct-injection and the automaker's VarioCam Plus, the new all-aluminum 2.5-liter flat-four will likely develop upwards of 350 horsepower and 360 pound-feet of torque. Redline should be about 7,500 rpm. Initial indications say that Porsche will only offer the new engine with its seven-speed PDK dual-clutch automatic, tuned to take advantage of the low-end torque, but a traditional six-speed manual gearbox has not been ruled out. Despite the loss of two cylinders, enthusiasts will likely embrace the new engine as it promises to be lighter, more fuel efficient and more powerful than the 2.7-liter and 3.4-liter sixes in the Cayman/Boxster today.
Even though Porsche has been using Volkswagen Group engines for years (e.g., Cayenne V6, Cayenne Diesel and upcoming Macan), all indications are that the new flat-four will not be shared. Instead, it will be kept in-house for the automaker's sports cars and possible future fitment in an entry-level 911.

Porsche bringing Macan S Diesel to US instead of 4-cylinder [w/poll]

When Porsche unveiled the new Macan at the LA Auto Show, it announced two powerplants for the US market, both of them twin-turbo V6s: the Macan S equipped with 340 horsepower from its 3.0-liter engine, and the Macan Turbo with 400 horses from 3.6 liters. But those aren't the only engines Porsche will offer in its new compact crossover. Porsche is also offering the Macan S Diesel overseas with 258 hp, and reports have since indicated that a pair of four-cylinder models on their way: a 2.0-liter turbo four with 280 hp and four-pot turbodiesel of the same capacity with an as-yet undisclosed output.
Now Car and Driver is reporting that while those four-cylinder engines won't be making the transatlantic voyage to our shores, Porsche will offer the aforementioned Macan S Diesel in North America beginning in early 2015, nearly a year after the gas V6 versions arrive.
The 3.0-liter turbodiesel V6 is based on the same engine found in the Cayenne Diesel and the Audi Q5 TDI on which the Macan is based. Of course, its 248 hp is substantially less than the 340 ponies in the Macan S, but its 413 pound-feet of torque outshines not only the 339 lb-ft in the Macan S but also the 406 lb-ft in the Macan Turbo. Acceleration times, however, suggest the Macan S Diesel is still slower, with a 6.3-second run to 62 mph than neither the Macan S (5.4 sec) or Macan Turbo (4.8). The good news is that the Macan S Diesel is tipped to undercut the price of both, dropping the oil-burning crossover's MSRP below that of the $49,900 starting price for the Macan S and the $49,600 for the base Cayenne. If that C/D prediction comes to pass, that will make it the Macan S Diesel most affordable Porsche sold.

Porsche wants you to 3D print your own Cayman

Have you got access to a 3D printer? Well lucky you, because as we're rapidly learning, the possibilities are virtually endless. And if your tastes lean towards the automotive (as we'd assume they do if you're reading this page), we've got good news.
Porsche has just released 3D printing data for the Cayman S so you can three-dimensionally print out your own and customize to your heart's content. Now Porsche hasn't specified just to what scale the data will allow you to print your Cayman, but we have a feeling that'd mostly be limited by the size of the printer at your disposal. Check it out in the video below and follow the link to the Porsche site to download the file.