1957 Porsche 356 on 2040-cars

Auto blog

Evo pits BMW M3 against Porsche Macan in drag battle

If you want to move five passengers in very rapid fashion and you've got a $75,000 budget, two newly introduced four-door models immediately come to mind - both are the highest performing vehicles in their respective segments. But which is faster off the line, to the 60-mile-per-hour benchmark or flat-out over an even longer run? Evo took both to paved aircraft runway to find out.
In lane one we've got the all-new Porsche Macan Turbo, which boasts a twin-turbocharged, 3.6-liter V6 rated at 400 horsepower and 406 pound-feet of torque. The Porsche is fitted with a seven-speed, dual-clutch gearbox, and the 4,244-pound crossover has the traction advantage of standard all-wheel drive. In lane two is the all-new BMW M3, powered by a twin-turbo 3.0-liter inline-six rated at 425 horsepower and 406 pound-feet of torque. It is also equipped with a seven-speed, dual-clutch gearbox, but only the rear wheels of the 3,595-pound sedan are driven. Both the BMW and Porsche arrive with launch control, which helps to remove driver error off the line.
Which automaker's launch control system is better off the line? Does all-wheel-drive grip give the crossover the advantage it needs to overcome its adversary's power-to-weight advantage? Will aerodynamics factor into the results? Which would you put in your garage, and why? The video may surprise you.

Will Roegge makes 4K art of Jeff Zwart's 911 build and run up Pikes Peak

Will Roegge has turned his camera on Jeff Zwart and provided another gem, this time documenting Zwart's run up Pikes Peak and BBI Autosport. Bertim Besha dropped out of high school, then worked his way up to founding his own shop, BBI, that gathers a crew of tuners who are just as fastidious about their work as the customers are about their cars.
They prepped the 991-series Porsche 911 GT3 Cup Turbo, the product of combining a 911 GT2 that was the most powerful car Zwart drove up the mountain with a GT3 Cup that Zwart thought had the best handling. Two TiAL turbos and a lot of fettling make for a 3.8-liter flat-six with 700 horsepower, 700 pound-feet of torque and a 7,800-rpm redline. Zwart drove it to a heartbreaking second place this year, finishing less than 1.2 seconds behind the Time Attack 1 class winner when his car suffered its first mechanical issue of the week.
The first video below covers Besha, BBI and the build, the second is Zwart's run. As if the visuals weren't enough, sit back and enjoy the shrieking of the "Hill Climb Special," which is what the constellation Sirius would sound like if it could bark.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.