Unique 1985 Mazda Rx-7 Gsl Custom Swapped With Bmw M50 6-cyl. 5-spd Drivetrain on 2040-cars

Auto blog

Mazda3 Skyactiv-Hybrid and CNG Concept shown in Japan

Mazda has received a tremendous amount of public and industry praise in the last few years, following up the successful introduction of its Skyactiv technology (powertrain and otherwise), with strong products like CX-5, Mazda6 and most recently, the Mazda3. At the Tokyo Motor Show, Mazda has taken yet another step forward with Skyactiv and the 3, showing the compact (called "Axela" in Japan) with an all-new compressed natural gas engine in the Skyactiv-CNG Concept.
The end result of the Skyactiv-Hybrid is fuel consumption estimated at something like 74 miles per gallon.
Mazda thinks that CNG-powered vehicles are due for an uptick in demand, and the company believes this new powertrain will add valuable breadth to the Mazda3 range. The CNG Concept is actually a duel-fuel vehicle, capable of running on either natural gas or gasoline. In fact, we're told that the high compression ratio (14:1) inherent in Skyactiv-technology gasoline engines makes conversion to CNG particularly simple.

Mazda struggles to meet demand on rising sales

For Mazda there's good and not-so-good news on the heels of strong US sales in 2012: demand is high - especially for the Mazda3, Mazda6 and CX-5 - but supply is low, TheDetroitBureau.com reports. That's partly because all Mazda production happens in Japan, since it ended its alliance with Ford and pulled out of a joint venture with the blue oval building cars in suburban Detroit last year.
In 2012, Mazda sales here jumped 26.4 percent, but 2013 sales through August have just been keeping pace with the overall US auto industry, increasing at a rate of 6.8 percent. Mazda North American Operations director of marketing and communications Jeremy Barnes says that sales have slowed because the company is facing challenges delivering products here.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...