1993 Mazda Rx-7 With Ls1/t56 And Bbs Wheels on 2040-cars
Winchester, Virginia, United States
Body Type:Coupe
Engine:1.3L 1308CC R2 GAS N/R Turbocharged
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 2
Make: Mazda
Model: RX-7
Trim: Touring Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Options: Sunroof, CD Player
Mileage: 112,300
Safety Features: Anti-Lock Brakes, Driver Airbag
Sub Model: v8
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Exterior Color: Red
Interior Color: Black
Vehicle: 93 Mazda Rx7 powered by LS1
Mileage: 112k miles on chassis
Transmission: 6-speed T56
Color: Ferrari Red
Location: Northern VA
Price: $27,500 obo
Reason for Selling: I have found that I'm the type of enthusiast that really enjoys building cars and driving them for a short time before getting interested in another project. I have since put a deposit down for an 818 (kit car) from factory five racing.
The swap was performed by PTuning in Manassas, VA using Hinson swap parts (subframe, trans mount, torque arm, cooling system, etc.). The torque arm has since been removed and replaced with Samberg differential mount, which is a much better design. The previous owner owned the car for around 8 years and just used the car as a cruiser.
Engine:
-LS1 engine and T-56 6-speed transmission from 2002 firebird
-LS6 intake manifold
-Hinson longtube headers 1 7/8" collectors
-Hinson Subframe – powdercoated black
-High flow cats x2 (1 on each side)
-Apexi shotgun style catback – Any rx7 catback exhaust system will fit with the positioning of the hinson headers.
-Setrab 25 row oil cooler in passenger front ducting
-Oil thermostat set for 185*
-Canton 3 qt Accusump with electronic psi regulator – below 35 psi oil pressure the accusump will send oil to the engine and above 40 psi the accusump will regain and maintain pressurized oil reserves. System has a hard switch to turn it off for street driving.
-Improved Racing oil pan baffle
-Oil: Amsoil 5w-40
-Transmission: Mobile 1 synthetic ATF
-Differential: Mobile 1 75w-90
-Fluids changed within 500 miles
Suspension:
-Quantum Motorsports coilovers - not adjustable and not overly stiff for street driving
-New Pillowball bushings x6 (less than 500 miles)
-New powerflex bushings: Rear upper/lower control arms, Front upper/lower control arms, and Sway bar mounts.
-Nylon differential bushings
-New improved racing rear sway bar endlinks
-New Mazda front sway bar endlinks
-Samberg differential mount
Brakes:
-Calipers all painted red – Front calipers have white "Mazda".
-New open slot rotor rings on front racing brake 2-piece rotors
-Slotted rear discs
-Stainless brake lines all around
-Motul 600rbf flushed within 500 miles
-Front and Rear brake pads are street pads with lots of life left.
Body:
-99 Spec Front Bumper
-New OEM lip
-Mazdaspeed replica side skirts
-Replica Rear Diffuser
-New OEM Front Splash Gaurds.
-Rear wiper has been deleted
-Antenna has been shaved
Paint:
-Car painted Ferrari Red for 2004 color code – During paint all windows/trim were removed as well as the engine.
-Car has been detailed by myself with no expenses or time spared and it shows.
Wheels:
-BBS RGR Wheels –
-Front 17x8.5 with 245/40/17 Dunlop Star Specs with a lot of tread left
-Rear 17x9.5 with 265/40/17 Dunlop Star Specs with an equal amount of tread left
-No curb rash on the wheels. They're in mint condition and have been sealed inside/out periodically with Klasse AIO to keep them protected.
-No signs of camber wear on tires. Alignment specs were mild for street driving with only -1* camber, 0 toe for prolonged tire life.
Interior:
-Authentic Bride Gias Sport Seats – Has the correct tags and certificates of authenticity. I ordered these from Ravspec.
-Authentic Bride Rails – sliding and adjustable
-Berber floor mats specific to the car – very high quality
-Prosport oil temp, coolant temp, and oil pressure gauges in triple dash pod from prosport.
-Kenwood Headunit with USB and aux port
-5x7 Speakers – Rockford Phosgate
The car has been to Summit Point Main 2x – once in November of 2012 and once at Hyperfest 2013 in June 2013. Both times the car performed beautifully without any off track incidents, temperature issues, or anything else out of the ordinary. Before the car ever went on track the necessary precautions were taken to make sure the car would remain reliable and happy. I am currently in HPDE2, which means I'm still learning how to drive. At this point I don't have the skills or desire to push the car to its limits. See below for modifications specifically made for track driving.
Track Upgrades:
-All fluids were changed before both track days. The improved racing oil pan baffle, accusump, and oil cooler are all recommended modifications before tracking an LS engine. While tracking the car oil pressures have remained constant and oil temps peaked at 220* on an 80* day while running for 25 minute sessions.
FAQ:
Does everything work as it should on the car?
-The only gauge (stock or aftermarket) that doesn’t work is the OEM oil pressure gauge. It probably could be returned to working status. However, I never hunted down why it wasn’t working since I bought the car.
-Yes, the car does have working a/c. Tends to struggle a bit on really hot and humid days. But anytime it’s below 90* the car stays cool.
-The heat does not work. I never had a problem driving the car during winter without heat. Although I wasn’t driving the car in anything other than sunny.
-Power windows, locks, etc. all work.
-Radio feature does not work due to the shaved antenna. I did purchase an antenna designed to be stashed under the dash. However, I haven’t installed it. The rest of the headunit works flawlessly.
The Bad: There is no such thing as a perfect car
-There is an ~1 inch crack in the bottom of the front bumper – it lines up perfectly so is only seen when there is pressure on the front bumper like when you’re washing it.
-The interior plastics around the cockpit (gauge surround, shifter surround etc.) are starting to show some age. Cheapest solution would be to wrap them with a flat black. Or you could have a body shop skim them with filler and then paint them with something glossy.
-There is a small 1" hole in the leather shift boot. A redlinegoods shift boot would solve that problem.
-I've found that the interior passenger door handle is loose. This is common with these cars. An aftermarket replacement from SakeBomb Garage would fix this 100%.
Overall:
-The car is a pleasure to drive. It performs flawlessly on the track (as seen in my video) and rides as it should. The car gets a lot of attention from all sorts of car enthusiasts. The rx7 is a truly timeless design that has been maintained to the highest degree. The car has been stored in a garage without exception since I’ve owned the car and has not been driven in the rain or snow. This car was just a fun nice day car.
Video from youtube of my last outing at Summit Point. I'm still learning to drive.
https://www.youtube.com/watch?v=tj2u1FtFYg8
Thanks for looking. If you have any questions please contact me and I'll be happy to answer any questions/concerns that you may have.
Mazda RX-7 for Sale
1993 mazda rx-7
Limited edition 1983 mazda rx7 with a 4 cylinder engine(US $5,000.00)
1985 mazda rx-7 gsl coupe 2-door 1.1l(US $10,500.00)
1988 mazda rx-7 convertible convertible 2-door 1.3l(US $13,000.00)
1988 mazda rx-7 convertible 2-door 1.3l(US $3,300.00)
1982 madzda rx7(US $850.00)
Auto Services in Virginia
Wiygul Automotive Clinic ★★★★★
Valle Auto Service ★★★★★
Trusted Auto Care ★★★★★
Stanton`s Towing ★★★★★
Southside Collision ★★★★★
Silas Suds Mobile Detailing ★★★★★
Auto blog
2015 Mazda2 revealed ahead of Paris debut [w/videos]
Thu, 17 Jul 2014Small cars may be big business, but the world's automakers don't seem to be in any particular rush to keep them fresh. The new Smart Fortwo unveiled yesterday replaces a model that's already been around for seven years, and based on a structure dating back to the late '90s. The new Opel Corsa revealed just last week replaces a model that had been around for eight years. And the Mazda2 has been on the market in its current form for seven years now, but not for much longer because Mazda has finally revealed its successor.
Set to be unveiled at the Paris Motor Show this October, the new Mazda2 follows the stylistic lead of the Hazumi concept remarkably close, from the sharply creased front end right down to the wheel design - bringing the supermini hatchback in line with the KODO design language that characterizes its bigger siblings: the Mazda3, Mazda6 and CX-5.
Although details released thus far are rather limited, and power will vary from one market to another, engine options center around a 1.5-liter four in both gasoline and diesel versions, joining the manual and automatic transmissions and the chassis itself under Mazda's Skyactiv technology umbrella. We wouldn't expect the diesel version to make it across the Pacific (or across the border from the plant that will build it alongside a new Toyota hatch in Mexico), but rumors have surfaced of a potential rotary hybrid. The new 2 will also include the company's MZD connectivity suite and i-Activsense safety technology.
Next Mazdaspeed3 could look this good
Fri, 28 Jun 2013Mazda showed off its brand-new 2014 Mazda3 at an event in New York City earlier this week, and we have to say, at first blush, we're pretty impressed. It looks fantastic - like a smaller, hatch'd version of the already sleek Mazda6 sedan that went on sale earlier this year. And with a 200-pound weight reduction, efficient Skyactiv gasoline engines underhood and Mazda's usual focus on driving dynamics above all, we're willing to bet that the new Three will be a pretty decent steer.
Of course, being enthusiasts, we're already setting our sights on the next-generation Mazdaspeed3, rendered here by artist Theo Chin. To our eyes, it's not a very imaginative transformation, but is likely a spot-on rendering for what the next car will look like. And it's really, really hot.
While Mazda hasn't exactly confirmed that the new Speed3 will be coming, sources within the automaker have indicated that a third-generation version of the MS3 is under development. Thing is, the Japanese automaker wants to give the standard Mazda3 some time to grow in the market, so we might not see the new Speed3 until something like 2016, with a possible diesel version to arrive before then.
Mazda doubles down with a pair of Threes
Wed, 06 Nov 2013Looking to appeal to the compact tuner crowd, Mazda brought two different flavors of its 2014 Mazda3 to the SEMA Show in Las Vegas this week. The Club Sport 3 Concept hatchback (above) has more of a racing vibe to it, while the Vector 3 Concept sedan (right) looks to inject a little extra fashion into the all-new Mazda3.
Hotting up the 3, Mazda stuck with the stock 2.5-liter engine on the Club Sport 3 Concept but added a limited-slip differential and six-speed manual gearbox, the latter of which was lifted from the CX-5 crossover. Other upgrades include coil-over shocks, a performance exhaust, Brembo brakes and an aero body kit - the latter of which will be offered to buyers at a later date.
While the Vector 3 Concept does get some performance bits like two-piece Brembo brake rotors and grippier tires, the focus on this sedan is all about styling. Starting with a custom paint job and ghost stripes, the whole look is tied together with 19-inch, V-spoke Rays wheels.