Mazda3 Speed3 Manual Six-speed 2010 on 2040-cars

Auto blog

White House clears way for NHTSA to mandate vehicle black boxes

At present, over 90 percent of all new vehicles sold in the United States today are equipped with event data recorders, more commonly known as black boxes. If the National Highway Traffic Safety Administration gets its way, that already high figure will swell to a full 100 percent in short order.
Such automotive black boxes have been in existence since the 1990s, and all current Ford, General Motors, Mazda and Toyota vehicles are so equipped. NHTSA has been attempting to make these data recorders mandatory for automakers, and according to The Detroit News, the White House Office of Management Budget has just finished reviewing the proposal, clearing the way. Now NHTSA is expected to draft new legislation to make the boxes a requirement.
One problem with current black boxes is that there's no set of standards for automakers to follow when creating what bits of data are recorded, and for how long or in what format it is stored. In other words, one automaker's box is probably not compatible with its competitors.

2015 Mazda2 spotted on the road

When Mazda unveiled the Hazumi Concept at the 2014 Geneva Motor Show, our excitement for the next Mazda2 increased considerably. The Hazumi looks to retain much of the driving character that makes the current 2 one of the very best cars in its segment while infusing it with more aggressive styling. Of course, when the 2 arrives, it won't look exactly like the Hazumi. That's why these spy photos are so important.
This is our very first look at the next-generation 2, and although the Hazumi influence might be difficult to discern, thanks to the swirly camo, it's still there. The grille shape and the headlights are very similar in shape to the items shown on the concept, while the camouflage disguises the shape of the greenhouse, which looks somewhat like the Hazumi.
What we can't see, though, is under the hood. That's where our spies come in, reporting that a pair of 1.5-liter SkyActiv engines will see action in the tossable 2. The former, which we'll almost certainly see in the US, is a gas-powered mill found in the Euro-spec Mazda3. In the larger 3, it produces 99 horsepower and 111 pound-feet of torque, which is broadly similar to what the current 2's 1.5-liter pumps out. The other engine, a 1.5-liter SkyActiv diesel, probably won't be making the trip, although we'll continue to hope.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...