Mazda Mazda3 4dr Sdn Auto S Grand Touring New Sedan Automatic Gasoline 2.5l 4 Cy on 2040-cars

Auto blog

2016 Mazda MX-5 Miata has arrived

Ladies and gentlemen, meet the 2016 Mazda MX-5 Miata. The highly anticipated fourth-generation (ND) model made its official debut in Monterey, CA this evening, and while details are slim (as in, we have practically none), there's one big thing to talk about: less weight.
Yes, Mazda has confirmed that the new Miata sheds some 220 pounds over the model it replaces, and is "the most compact of any generation MX-5 so far." For those keeping track, that means the new MX-5 should weigh in somewhere around 2,200 pounds.
Mazda's Kodo design language is obvious here, with a seriously wide and low demeanor, and a mix of flowing lines and sharp angles. We don't have any powertrain details to report as of this writing, but Mazda says the full suite of Skyactiv technologies are onboard, and the motto in creating this car was "Innovate in order to preserve."

Mazda reports strong Skyactiv sales, plans to boost output 25%

Mazda is set to expand production of its Skyactiv engines after critical and commercial acclaim for the fuel-sipping powerplants. The Japanese manufacturer has a number of plans in the works to bump up production, with the first being a 25-percent increase in output from its Hiroshima, Japan engine facility.
Besides adding a new line, Mazda will modify the line that built MZR engines, a family of mills that includes the 2.3-liter, turbocharged four-cylinder found in the Mazdaspeed3 and the 2.0-liter found in the MX-5 Miata. The bump in production is just part of Mazda's goal of selling 1.7 million vehicles globally by 2016, with 80 percent of those vehicles expected to wear a Skyactiv badge.
Mazda also builds Skyactiv engines at a joint-venture facility with Ford, in Changan, China, while a Mexican facility will go online by March of 2014. Skyactiv engines currently power the Mazda3, Mazda6 and CX-5.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...