2012 Mazda Mazda3 I Touring on 2040-cars
3300 Tyrone Blvd, St Petersburg, Florida, United States
Engine:Gas I4 2.0L/122
Transmission:6-Speed Automatic
VIN (Vehicle Identification Number): JM1BL1V7XC1665742
Stock Num: T22996A
Make: Mazda
Model: Mazda3 i Touring
Year: 2012
Exterior Color: Graphite Mica
Interior Color: Black
Options: Drive Type: FWD
Number of Doors: 4 Doors
Mileage: 18916
Mazda Certified, SKYACTIV-G 2.0L 4-Cylinder, 6-Speed SKYACTIV Sport Automatic, Black w/Cloth Seat Trim, Alloy wheels, and Power Sliding-Glass Moonroof w/Interior Sunshade. If you demand the best things in life, this great 2012 Mazda Mazda3 is the low-mileage car for you. Car And Driver reports Mazda 3 delivers an exceptional package in all of its trim levels. It is nicely equipped with features such as Mazda Certified, SKYACTIV-G 2.0L 4-Cylinder, 6-Speed SKYACTIV Sport Automatic, Black w/Cloth Seat Trim, Alloy wheels, and Power Sliding-Glass Moonroof w/Interior Sunshade. Mazda Certified Pre-Owned means you not only get the reassurance of a 12mo/12,000 mile Limited Warranty, and up to a 7-Year/100,000 mile Limited Powertrain Warranty, but also a 150-point inspection/reconditioning, 24/7 roadside assistance, and a vehicle history report. Precise handling. Visit our virtual showroom 24/7 at www.tyronesquaremazda.com. Tyrone Square Mazda, we are your "Always Fair, Always Square" dealer in St. Petersburg, FL. We view your purchase of a new or used Mazda as the beginning of a long term relationship based on honesty, integrity, and trust. Not just a one-time sale. Come in and see why Tyrone Square Mazda should be your Mazda dealer. **Sponsors of the So Classic Car Show in Gulfport!**
Mazda Mazda3 for Sale
2012 mazda mazda3 i touring(US $17,988.00)
2012 mazda mazda3 s grand touring(US $17,988.00)
2014 mazda mazda3 i sport(US $20,290.00)
2014 mazda mazda3 i touring(US $21,440.00)
2013 mazda mazda3 i grand touring(US $21,988.00)
2011 mazda mazda3 i touring(US $14,988.00)
Auto Services in Florida
Xtreme Car Installation ★★★★★
White Ford Company Inc ★★★★★
Wheel Innovations & Wheel Repair ★★★★★
West Orange Automotive ★★★★★
Wally`s Garage ★★★★★
VIP Car Wash ★★★★★
Auto blog
Mazda details diesel prototype at Daytona test
Mon, 06 Jan 2014Diesel has without a doubt become the dominant fuel in the modern era of endurance racing. The 24 Hours of Le Mans has been won under diesel power for the past eight years running, as has every race in the FIA World Endurance Championship since its inauguration in 2012. Yet there will only be one diesel prototype entered in the top tier of the new Tudor United SportsCar Championship this year, and it belongs to Mazda.
The last Japanese manufacturer to win at Le Mans outright, Mazda has been gradually working its way back up the endurance racing ladder once again, following the example set by Audi with diesel power. Last year it campaigned a competition-spec Mazda6 Skyactiv-D in the GX class of the Grand-Am series, but rather than simply port over the existing racer into the new series, it's fielding a new prototype instead, just as it promised a couple of months ago. And now that prototype has hit the track for the first time, prompting Mazda to release its basic specs for the first time.
Tentatively referred to simply as the 2014 Mazda Prototype, the purpose-built racecar is testing this weekend in the Roar Before the 24, the official test session at Daytona that kicks off the racing season. It packs a 2.2-liter SkyActiv-D engine that's based heavily on the production version but tuned to produce 450 horsepower and 580 pound-feet of torque in race trim. Power is channeled through a six-speed sequential transmission from Xtrac, carbon brakes from AP and 18-inch racing slicks from Continental. With the Daytona-spec aero setup, it'll top out at around 186 miles per hour.
Mazda2 successor to ride atop shortened CX-5 platform
Fri, 31 May 2013Mazda, looking to make the most of its new, lightweight Skyactiv vehicle architecture, will allegedly use a version of the CX-5 crossover's platform to underpin its next-generation Mazda2 hatchback, according to a report from Just-Auto.com. Of course, the Mazda2 is a much smaller vehicle than its larger CUV stablemate, so some serious chopping will no doubt be in order when it comes time to engineer the replacement for the company's smallest hatch.
Currently, the CX-5 and the sleek new Mazda6 share many of the same platform components, and this architecture will already be scaled down to support the next-generation Mazda3 sedan and hatchback, which will debut later this year. Just-Auto.com states that all of Mazda's remaining front-wheel-drive vehicles will eventually switch to reworked versions of this Skyactiv platform, including the replacement for the larger CX-9 crossover.
Also of note, Mazda will reportedly be switching to shorter, four-year lifecycles for its vehicles. This means that the newly launched Mazda6 will be replaced for the 2016 calendar year, with a refresh coming sometime in 2014. That said, vehicles with platforms supplied by other automakers (like the upcoming MX-5 Miata replacement that will share its underpinnings with an Alfa Romeo product) will not necessarily follow this four-year rule.
Mazda's new Mexican plant capacity rises to 230,000
Sat, 05 Jan 2013After the turmoil of last year, 2013 is getting off to a much better start for Mazda. The company has issued a release indicating that the forthcoming plant in Salamanca, Mexico has had its production capacity raised even though it isn't scheduled to go online until March 2014. The original plans called for a 140,000-unit capacity, 90,000 of that allotted for the Mazda2 and Mazda3, the remaining 50,000 for a small car Mazda would build for Toyota that would be based on the Mazda2. The new plans call for raising that by 90,000 units to a total of 230,000 units within two years, by the end of March 2016, and it looks like it will all go toward Mazda production to satisfy growing demand for Skyactiv vehciles. The Mexican plant's opening will be the return of Mazda manufacturing to North America, after Mazda6 production was moved back to Japan last year.
More good news for the company is that it projects 10 billion yen ($114 million) in net income for the financial year that will end in March. That would be a welcome turnaround from the 100-billion-yen loss in the previous financial year, part of a series of three annual losses in a four-year span.
You'll find the press release with the factory update below.