2007 Hyundai Sonata Gls Sedan 4-door 2.4l on 2040-cars

Auto blog

Hyundai ix25 Concept foreshadows B-segment CUV

Hyundai introduced an all-new crossover concept to the crowds at the 2014 Beijing Motor Show, showing the ix25, a near-production concept that heralds the arrival of a new compact CUV for the People's Republic.
Boasting Hyundai's "Fluidic Sculpture 2.0," the ix25 is a handsome little soft-roader that we could see slotting in nicely below the vehicle we call Tucson (the rest of the globe knows it as the ix35), and would serve as the entry point for Hyundai's Chinese CUV range. Under hood sits a familiar 2.0-liter, "Nu" four-cylinder, which we've sampled in assorted Hyundais and Kias over the years.
At 168 inches long it's ten inches shorter than a Ford Escape and five inches longer than the Soul, from sister company Kia. Despite these differences, the ix25 Concept's wheelbase is less than an inch longer (eight-tenths to be exact) than the Soul's 101.2-inches. More notably, the ix25 is roughly the size of the new Chevrolet Trax.

2015 Hyundai Sonata confirmed for New York debut

Despite receiving a host of improvements for the 2014 model year, the next-generation Hyundai Sonata is right around the corner. During a technical briefing today, Hyundai's North American CEO, John Krafcik, has confirmed to Autoblog that the 2015 Sonata will debut at the 2014 New York Auto Show in April.
The Sonata will be one of Hyundai's three major launches coming in the first half of 2014. First will be the 2015 Genesis sedan, which will bow at the 2014 Detroit Auto Show, and also coming in 2014 is a new fuel-cell vehicle from Hyundai.
Despite the current Sonata's age relative to key rivals, it's still doing rather well for Hyundai. Krafcik told us that the sedan currently has a 42-day dealer supply, which is lower than its fresher competitors. The nipped/tucked 2014 Sonata should help keep that momentum going until this all-new 2015 model arrives next year.

Hyundai bringing 1,000-hp Genesis Coupe to SEMA

Hyundai has just unleashed its first volley at the SEMA crowd in the form of the Genesis Coupe you see above, and it's a duesy. By partnering with the powertrain gurus from Bisimoto, Hyundai has managed to cram a thousand horsepower into this highly accessorized black and blue machine, using a mill based on the naturally aspirated Genesis Coupe 3.8 R-Spec engine block.
The big powers are a pair of Bisimoto/Turbonetics BTX6462 turbochargers, which are joined by a full set of aftermarket internals that include new connecting rods, camshafts, forged pistons, fuel pump and fuel injectors, and a massive intercooler. With all that power, the chassis was going to need some updates, such as a complete roll cage and a custom coilover suspension setup.
As is expected from a SEMA show car, there is a bespoke graphics and bodywork package, highlighted by a carbon fiber hood and decklid. Check out the two images provided by Hyundai and the press release below for all the details.