2010 Honda Fit Sport Hatchback 4-door 1.5l on 2040-cars

Auto blog

Acura NSX prototype gets back on track

Developing a new vehicle is not without its complications, we're sure, but usually things follow a fairly predictable progression: you develop a prototype, you test it, test it and test it again, then you put it into production. What you don't expect is that your prototype will burn to the ground, but that's what famously happened to the NSX which Honda engineers were testing a few months ago.
Fortunately, the Acura NSX prototype is back on track, both literally and figuratively, as you can see from this latest batch of spy shots snapped at the Nürburgring. This camouflaged prototype looks pretty much the same as the last one, only, you know... less crispy. Which is to say, it looks pretty much ready to hit showrooms.
The naysayers may point out that Honda chose colder and damper weather to put the NSX back into testing - thereby mitigating the risk of another fire - but we're sure the Japanese automaker has been working hard to fix the flammability issues, whatever may have caused them, over the past few months. At least, we hope they have.

McLaren working on P15 supercar to slot between 650S and P1

McLaren has been busy these past few years. It launched the MP4-12C in 2011, the 12C Spider in 2012, the P1 in 2013 and (most recently) the 650S in 2014. But it's not about to stop there. It's got an "entry-level" model in the works, set to take on the Porsche 911, and - according to information reported by Car and Driver and confirmed by McLaren in correspondence with Autoblog - a new flagship model, too.
The project is internally codenamed P15, and it calls for a new flagship that will cap the company's lineup once the P1 finishes its limited production run, but carry a price tag in the neighborhood of $500k to slot in between the P1 and the new 650S.
Just how, you wonder, can McLaren possibly develop another supercar each year? Simple: underneath, they're all essentially the same. (Only we're sure it's anything but simple.) That is to say they're all based on the same carbon monocoque structure and powered by the same 3.8-liter twin-turbo V8 mated to a seven-speed dual-clutch transmission driving the rear wheels. What differentiates them is what the engineers in Woking build around that monocoque and how they tune the engine: +/- 600 horsepower in the 12C (depending on the year it was built), 640 hp in the 650S, or 727 hp in the P1 (with another 177 from the electric assist). The 911 fighter would likely develop in the 500hp range, and the P15 will probably land in the upper 600 (or lower 700) range.

Honda Performance Development reveals new ARX-04b LMP2 coupe

Make no mistake about it: Honda is big in racing. It was the first Japanese automaker to enter Formula One, remains the most successful and is set to return as an engine supplier next season. It's powered more IndyCar race winners and champions than any other manufacturer, hands down. Honda has won races and titles in Super GT, WTCC, even motorcycle racing. Just about everything this side of NASCAR, really. And that includes endurance sports car racing.
In fact Honda Performance Development prototypes claimed over 70 victories and numerous titles in the American Le Mans Series, and took the first LMP2 title in the FIA World Endurance Championship. And with sportscar racing in the US now grouped together into the United SportsCar Championship, Honda is back with a new chassis design.
Called the ARX-04b, it's Honda's first closed-cockpit LMP2. Like previous LMP2 and IndyCar projects, it's a joint development between HPD and Wirth Research, and packs Honda's HR28TT engine - a 2.8-liter twin-turbo V6 based on (and using many of the same components as) the J35 engine you'd find in a contemporary Acura. Designed to exceed the latest safety regulations, the ARX-04b features low-drag bodywork, quick-change front and rear panels, the same locking fuel filler system that Honda pioneered for Indy, top-exit exhaust to meet noise regulations, a 75-liter fuel tank and a gearbox that can easily be optimized for individual circuits.