Ford Other Custom on 2040-cars
Grand Prairie, Texas, United States
This is an amazingly beautiful all-steel car showing no use. This car is 99% perfect. Building a car this nice would cost $100,000 to $150,000. This car is indoor show quality in every way.It was first built 60’s style with whitewalls, white top, and white interior by the original/owner and builder Randy G. of WV. He possesses a great deal of knowledge about this car. See SUMMARY below for links to the magazine article and pics of the car’s original 60’s style build. It was redone in approximately 2013 by Ender’s Hot Garage of Montgomery, TX for Erica Enders, the 2014 NHRA Pro Stock World Champion. Erica Enders and her sister Courtney were chronicled in the 2003 Disney movie “Right On Track”. This movie was the fact-based drama of the Enders sisters’ battle to compete and win in the male-dominated sport of NHRA racing with the inspiration of their father, Gregg Enders. I purchased this car from Gregg Enders. I have the clear title in my name. It shows Gregg Enders as the previous owner. I also have a copy of the previous title with Gregg Enders as the owner. Of course, I had to relinquish the title with Gregg Enders as owner when I titled the car in my name. Upon redoing the interior Enders Hot Rod Garage had the front panel inside the trunk stitched with the Erica Enders logo of 2 opposing letter “E”s.The all-steel body was built by Kenny's Rod & Kustom of Newton Falls, Ohio and is based on a Hot Rods & Horsepower body per the original owner/builder. Hot Rods & Horsepower was affiliated with and did work for Dearborn Deuce. I am certain the body is all steel because I have gone over entire body with a magnet. This car also has a 40 Ford-style dash, Duvall windshield, stainless grille, shaved door handles, hidden door hinges, removable soft top in tan Hartz cloth. The paint color is Chrysler Electric Blue. It is a bright-blue metallic showing only minor scratches from installing/removing the top and misaligned door hinges. I have re-aligned both doors. Scratches are only in six areas: top rear corner of both doors, near tabs where top mounts, and in front of the doors just above the frame (probably caused by letting the doors just swing open). If you are careful and have help, there is no reason to scratch the car installing or removing the top. Simple and clean pinstriping in tan and light blue at belt line and on trunk lid. CHASSIS: Fatman chassis purchased and assembled by the original owner/builder along with Kenny’s Rod & Kustom. Pete & Jakes all-chrome front suspension and shocks with tubular axle and polished billet Wilwood disc brakes. Rear end housing is a fully polished STAINLESS STEEL Ford 9” with an aluminum 3rd member and 3.56 gears. The rear end is located by Polished stainless 2-link bars with a stainless panhard bar. It is suspended by aluminum coil-over shocks and Aerospace billet discs. Brakes and steering are manual but function great in a car this light. 15” real Halibrands fully polished on both sides with knock off covers. BF Goodrich 285/70’s on the rear and 195/65’s on the front. The entire chassis and floorpan have been painted the same bright blue as the body. It is as clean and nice as you would expect of any show-winning ride. ENGINE/TRANS: 468 BB Chevy with polished Edelbrock Perfomer RPM heads. Dual polished Edelbrock carbs on a coated Edelbrock intake. Mild hydraulic cam. Cam specs unknown but it is not too wild and not too mild. It has the just-right mean and tough idle but purrs nicely at any speed. Jet-Hot coated and baffled headers are loud but not too loud to enjoy your ride. Fully automatic TH350 with a mild performance torque converter. Just put it in drive and enjoy the ride.INTERIOR: High-grade leather-look vinyl with high-end carpet in cockpit and trunk. Metal floor mats were fabricated in aluminum to improve fit and finish. They are covered in the same high-end carpet as the floor pan. Radio is mounted under the seat. Engraved aluminum steering wheel mounted on a polished Ididit column. Steering wheel has a quick-release mount to remove the steering wheel. This makes entry and exit easier for drivers who eat as good as I do. Trunk panels are easily removable to access battery and fuse block. ITEMS NEEDED: Vega steering is a little loose. It needs to be adjusted. Radio antenna does not seem to be hooked up but it is there hidden behind the seat. Speedometer does not work.
Ford Windstar for Sale
- Ford other deluxe convertible street rod(US $13,000.00)
- Ford roadster convertable(US $18,000.00)
- Ford other fenderless oze hot rod coupe(US $23,000.00)
- Replica/kit makes 1965 shelby backdraft cobra 427(US $20,000.00)
- Ford f-100 ranger xlt(US $3,000.00)
- Ford f-100 ranger xlt(US $3,000.00)
Auto Services in Texas
Yescas Brothers Auto Sales ★★★★★
Whitney Motor Cars ★★★★★
Two-Day Auto Painting & Body Shop ★★★★★
Transmission Masters ★★★★★
Top Cash for Cars & Trucks : Running or Not ★★★★★
Tommy`s Auto Service ★★★★★
Auto blog
Ford tells Congress it collects and protects some driver data
Fri, 14 Feb 2014Last month Ford's Jim Farley made waves at the CES when it was reported he told show attendees, "We have GPS in your car, so we know what you're doing. By the way, we don't supply that data to anyone." Farley and Ford later partially retracted and clarified that statement.
Spurred by a desire for further transparency on data collection policies, Ford representatives answered questions from Congress, specifically Senator Al Franken (D-Minn.), about driver privacy.
The Detroit News reports that Ford told Congress it does collect some vehicle location data in an effort to "troubleshoot and improve our products" on behalf of the driver. Ford went on to say that it only collects limited data after receiving permission from owners.
2016 Ford Mustang SVT hides big power under its domed hood
Tue, 17 Jun 2014With a number of 2015 Ford Mustang versions finally available to configure, the fun of speculating about next year's high-performance 'Stang can now begin. It looks like Ford has something seriously fun planned too. One of our spy photographers just snapped some fresh pics of the 2016 Mustang SVT, which is believed to be hiding the final body shape under all of that heavy camouflage.
Ford clearly doesn't want prying eyes looking at its new pride and joy. It would be hard to put much more obfuscation on a car than this one wears - it even has mesh baffles around the exhausts to conceal how many there are and panels over the wheels to hide their design. However, the Blue Oval can't keep everything a secret. The biggest clue that something special is hidden underneath is the massive hood bulge and vent in front of it. Clearly, whatever is under there is hungry for cool air. The shape of the camo indicates that there may be fender vents on each side, and there are also obscured outlets behind the front wheels likely to pull cool air through the brakes. At the rear, the concealment does its job, making it hard to observe any big changes. The fact that Ford wants it kept such a secret might indicate something, though.
A few photos of the interior show far less cover than the outside. You can easily make out the model's 6,500 rpm redline with a possible 7,000 rpm over-rev function. The big Recaro sport seats also look quite supportive.
Ford turns Navistar from truck business customer to rival
Mon, 19 May 2014There is a showdown brewing in the medium-duty truck segment next year as Ford prepares to launch its all-new, in-house engineered 2016 F-650 and F-750. It finally marks the end of the Blue Diamond joint venture between Ford and Navistar and, making the two entities direct competitors instead of partners.
Ford announced the end of the joint venture in an investor report in 2011, but it didn't reveal the new F-650 and F-750 until the NTEA Work Truck Show in Indianapolis, IN, in March. Unlike the current, Mexican-built models, the new generation will be built in Avon Lake, OH, starting in mid-2015.
The challenge from Ford comes during a rough patch for Navistar. The company had a $248 million loss in the first quarter, according to The Wall Street Journal, and its medium-duty truck market share is currently down to 26 percent, from 36 percent in 2011. Building the previous-generation Fords brought in about $400 million a year to Navistar, according to the WSJ. To take on its former partner, Navistar plans to offer its International brand of medium-duty vehicles with more engine and transmission options to customers. It even struck a deal with Cummins to put its diesels in some of the models.