Find or Sell Used Cars, Trucks, and SUVs in USA

2001 Ford Taurus Lx Sedan 4-door 3.0l on 2040-cars

Year:2001 Mileage:93000 Color: White /
 Beige
Location:

Woodstock, Georgia, United States

Woodstock, Georgia, United States
Transmission:Automatic
Body Type:Sedan
Vehicle Title:Clear
Engine:3.0L 182Cu. In. V6 FLEX OHV Naturally Aspirated
Fuel Type:FLEX
For Sale By:CJC Auto Brokers Marietta, Georgia
VIN: 1FAFP52291A231613 Year: 2001
Number of Cylinders: 6
Make: Ford
Model: Taurus
Trim: LX Sedan 4-Door
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag, Side Airbags
Drive Type: FWD
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Mileage: 93,000
Sub Model: LX
Exterior Color: White
Number of Doors: 4
Interior Color: Beige
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

Options:

I have a 2001 Ford Taurus LX Flex Fuel with 93K Miles. The car has a NEW ALTERNATOR, STARTER, TIRES, AND BATTERY!!!! The car has 6 Passenger Seating, Air Conditioning, ABS Brakes, AM/FM Radio, Auxiliary Power Outlet, Child Safety Locks, Cloth Seats, Cruise Control, Dual Air Bags, Front Reading Lamps, Intermittent Wipers, Power Locks, Power Mirrors, Power Windows, Power Steering, Rear Defrost, Tilt Steering, Tilt Steering Wheel, Trip Counter, 2 Wheel Drive, US EPA Label, and Wheel Covers.

Mechanical:

6 Cylinder Gas, Automatic with Overdrive (O/D), Power Brakes, 2 Wheel Drive, 3.0 L Engine, Gas Saver!!! (V6 Engine)

Interior:

Odometer- 6 Digits Analog - Operable, Cloth Seats, and Regular Dash

Tires and Wheels:

All Wheels are Goodyear Brand, Size: 215/60R16

Keys:

Master Key -1

 

Auto Services in Georgia

ZBest Cars ★★★★★

New Car Dealers, Used Car Dealers, New Truck Dealers
Address: 3280 Commerce Ave, Avondale-Estates
Phone: (888) 862-8501

Youmans Chevrolet Co ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 2020 Riverside Dr, Elko
Phone: (478) 746-2020

Wren`s Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Wheels-Aligning & Balancing
Address: 6402 Fairburn Rd, Douglasville
Phone: (770) 942-5642

Wholesale Tire & Wheel Co ★★★★★

Auto Repair & Service, Tire Dealers
Address: 620 General Courtney Hodges Blvd, Perry
Phone: (478) 987-4794

Walton Tire Co ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 290 Lee Byrd Rd, Winder
Phone: (770) 466-4447

TJ Custom Muffler & Brake ★★★★★

Auto Repair & Service, Mufflers & Exhaust Systems, Brake Repair
Address: 3998 Center Hill Church Rd, Monroe
Phone: (770) 554-4496

Auto blog

Ford paying $750 million just to close plant in Belgium

Thu, 21 Mar 2013

According to a report from Reuters, Ford is shelling out $750 million in a severance deal that will see the automaker close its facility in Genk, Belgium. The automaker reached this deal with the 4,000 hourly workers employed at the plant last week, which means the company will pay out an average of $187,500 per worker.
Ford is still negotiating with the 300 salaried workers at the factory, which currently produces the Mondeo sedan. All told, Ford expects to lose around $2 billion in Europe thanks in no small part to the region's ongoing economic downturn, and two more plants are scheduled to be shut down in Europe this year. The company will log its $750 million payout under "special items" for this quarter.
As you may recall, Ford took a similar path in the US back in 2009 when the domestic market took a spill. Back then, the company shelled out around $50,000 per employee with at least one year of experience, plus either $25,000 toward a new car or an extra cash payment of $20,000. It would seem the cost of closing plants in Belgium is a much harder pill to swallow than in the States...

Hennessey Ford GT sets 267.6-MPH record at Texas Mile [w/videos]

Mon, 25 Mar 2013

The record-setting Hennessey-powered camouflage Ford GT we showed you at this time last year headed back to the Texas Mile and managed to bring home yet another record. As you may recollect, last year saw Mark Heidraker's machine sprint to a record 257.7 mph thanks to propulsion from its twin-turbo 5.7-liter V8. The big mill sucks down race gas, and this year the creation pulled off a 267.6-mph run over the weekend. That feat set a new record for the event. Something tells us neither Heidraker nor Hennessey are done squeezing more thrust from this machine.
This particular Ford GT has already gone through a number of permutations. Hennessey started by tweaking the factory supercharger set up before abandoning the blower in favor of two turbos. Since then, the crew has poked and prodded it to coerce as much grunt as possible out of the car. We expect Hennessey will probably come out with a video of the record-setting run shortly, but in the meantime, you can see a couple of videos of the car's runs in Texas below (one of which actually captures the record run). Enjoy.

Ford rethinking vehicle launch strategy

Tue, 07 May 2013

With a new boss at the helm, Ford is looking at new ways to improve its vehicle launches in North America to prevent recent issues that have popped up with models like the Lincoln MKZ, Ford Escape and Ford Fusion. Speaking with Automotive News, Ford's new president of the Americas, Joe Hinrichs, revealed a few ways the automaker plans to avoid early build issues such as the engine fires on certain 2013 Escape and Fusion models and months-long delays for customers to receive their MKZs.
It sounds like the root of the problems may have been Ford's relationship with suppliers compounded by the fact that the product surge came on the heels of the recent industry-crippling recession, and in the AN article, Hinrichs says improvements are being made to reduce problems during the launch of new or redesigned models. Three such improvements that were implemented during the first quarter of this year including more rigorous quality comparisons, better use of computer technology to catch major problems sooner and hiring engineers to work closer with suppliers.