1995 Ford Taurus Gl Sedan 4-door 3.0l on 2040-cars
Tijeras, New Mexico, United States
Body Type:Sedan
Engine:3.0L 182Cu. In. V6 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 6
Make: Ford
Model: Taurus
Trim: GL Sedan 4-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: FWD
Options: CD Player
Mileage: 213,750
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Sub Model: GL
Power Options: Air Conditioning, Power Locks, Power Windows, Power Seats
Exterior Color: Silver
Interior Color: Gray
Nice looking good running commuter car. High mileage (213750). Tires were replaced last year and likely have less than 10K miles on them, good condition. Seats in good shape and not torn. Rear of roof is sun faded (see photos). Engine runs great and uses very little oil, perhaps a quart every 5000 miles or so. Auto trans works good but leaks somewhere, I have to add a quart every few thousand highway miles. Does not leak when sitting, no oil stains underneath. Interior Door panels are loose but untorn. Minor exterior finish dings, see photos. Body good shape with no cancer. Non smoker owner.
Local Pickup only - will not sell the car unless you have seen and driven it.
Ford Taurus for Sale
- 1994 ford taurus sho sedan 4-door 3.2l(US $7,500.00)
- 1999 ford taurus station wagon great cond!(US $2,499.00)
- No reserve auction! highest bidder wins! come see this reliable ford taurus sel!
- 2013 ford taurus~sho~awd~loaded~navi~cam~sync~htd cld~free shipping~we finance(US $38,495.00)
- 2001 ford taurus
- Sho new 3.5l cd awd 3.5l v6 ecoboost engine (std) all weather floor mats abs(US $39,997.00)
Auto Services in New Mexico
Uptown Auto Repair ★★★★★
University Volkswagen Mazda ★★★★★
Southwest Collision Craftsmen ★★★★★
One Stop Automotive ★★★★★
Montana Mufflers & Brakes Inc ★★★★★
Modern Autoworks ★★★★★
Auto blog
2016 Ford Focus RS mule spotted on US soil
Tue, 17 Jun 2014Okay Ford, this is what we like to see. One of our intrepid spy photographers has captured a vehicle that we weren't even sure would see the light of day - the next Focus RS. While this is pretty clearly a mule based on the current Focus ST, as our spy points out, there are a number of giveaways about this hot hatch's true nature.
Indication number one that all is not right with this Focus is the heavily camo'd front fascia, which has been completely reconfigured for duty on the RS. It boasts significantly larger grilles that are meant to accommodate what is likely the 2.3-liter, turbocharged four-cylinder that's destined for the 2015 Ford Mustang. Considering that, then, we can expect around 300 horsepower and 300 pound-feet of torque from the hottest of Foci, although it's entirely possible that the production model could climb even higher, to around 330 hp.
The front fascia tweaks are complemented in the back by a modified rear bumper, which fails at hiding a pair of exhaust tips quite unlike the standard Focus ST's center-exit exhaust. Other obvious changes include the wheel/tire/brake package on this particular car. Larger 19-inch wheels are shod in super-sticky Michelin Pilot Super Sport tires in 235/35/19 while the brakes feature what we think are four-piston calipers, possibly from Brembo, up front.
2014 Ford Fiesta ST
Tue, 15 Oct 2013I'm not overly inclined to professional jealousy, as a rule. Sure, I go a bit green around the eyes when Ramsey draws the 911 GT3 trip to Weissach, Harley is tapped-in to drive a completely stunning Porsche 911 by Singer, or, you know, Drew Phillips gets to shoot a Lamborghini Veneno in the middle of a desert like some sort of sheik. I hate you guys...
Honestly though, one of the new car events that dug me the most, was when our Steven J. Ewing got to fling the Ford Fiesta ST around some hot corner of Europe. What goes around comes around, I suppose, as Mr. Ewing himself espoused an envious nature of the Focus ST trip that came before.
The good news in all this covetous intra-office behavior? All the cars mentioned, and specifically the Fiesta ST, are just wonderful to drive. I can say that with more confidence than ever now, having joined Ford for a good bit of Fiesta-flinging myself. In my case, the locale was slightly more pedestrian (Michigan not Portugal), and the car in question was the five-door version of the Fiesta ST that we get here in The States, as opposed to the three-door number they get across the pond.
This is what a 3D-printed liquid metal Ford Torino looks like
Sat, 12 Oct 2013Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.