1962 Ford Falcon Ranchero W/ 302 V8 Conversion - Low Reserve - Runs Great! on 2040-cars
Saint Clairsville, Ohio, United States
You are looking at a 1962 Ford Ranchero with a V8
conversion. I purchased this truck a few
months ago as a project for my sons to work with me on. I bought it from an old timer who was in the
process of bringing it back to life but who lost interest in the project once
his wife died. My kids have had a blast
working on it with me and have really learned from the experience. Unfortunately I am 6’7” tall and, while I am
able to drive this truck, it is a tight squeeze for me so I’d like to find a
larger vehicle for us to work on – a 60s or 70s Ford or Chevrolet pickup or a
later model Ranchero. I’ll apologize ahead of time if the description is
long-winded but I figure if you are going to consider spending thousands of
dollars on a vehicle you should have as much information as possible including
text, pictures and videos. The truck has a rat rod/old school hot rod feel to it with
the primer and the Hillborn style scoop sticking out of the hood. While it isn’t a rat rod by most definitions,
that is the overall vibe of the car and how many see it. It gets attention wherever it goes – seems
that people always want to talk about it.
You just don’t see too many of these around. Here are some of its features: Motor: Originally a 6 cylinder manual transmission vehicle, the
truck is now powered by a Summit Racing 302 short block that was put in 4 years
ago and has less than 2K miles on it. It
is as fresh as the day it was put in, has a very mild cam that allows for a
great sound while still remaining completely streetable. It starts right up without any smoke and has
great compression and oil pressure. It
has 1966 302 heads (the previous owner said they were out of a Mustang), an Edelbrock
1405 Performer 600 CFM 4 barrel carb with a manual choke, an Edelbrock
performer intake and Headman headers.
This motor was done right and is turn-key. You can hear a bit of idle and revving here: I also shot a video of it going down the road in a mix of
back road and highway conditions so that you can hear it run. Don’t mind the bouncing – it’s my phone mount
not the car’s suspension. You can find
the video here: Exhaust: The truck has brand new exhaust on it from the headers
back. It features Cherry Bombs and it
dumps out right in front of the rear wheels. The side exit exhaust really adds to the hot rod feel of the truck. It sounds great and there is no drone to it. Body: The body is straight with a few bubbles visible very low on
the car but nothing significant at all.
Some rust underneath but the fame is solid as are the passenger and
driver floor pans (it appears that the driver’s side has been replaced, perhaps
the passenger side as well). Rust
through the bottom of what would be the passenger foot wells had this been a
station wagon (if you are familiar with these you know what I am talking about)
but these are under the bed of the truck and are not used. They can be fixed from above easily by
removing the forward panel in the truck bed.
The bed itself is solid and the tailgate works as it should. The tails have blue dots in them. All signals and lights work. The gas tank has been replaced with one from
a 67 Falcon and the filler has been relocated to the bed area for a sleeker
look along the sides of the vehicle. The
opening that was cut into the hood is rough.
It has some molding around it and looks OK from 10’ away but it leaves a
little to be desired. If I were going to
keep it I would replace the hood with an aftermarket fiberglass hood (which are
plentiful thanks to it sharing hood specifications with the Falcon of that
year). Or you can leave it as is
(everybody seems to love seeing a car with something sticking out of the hood!)
or massage that opening a bit to give it a more polished appearance. Original Falcon hoods show up on eBay
regularly and will normally run you less than $250 if you want to go that
route. You’ll just need a lower profile
air cleaner to make that work. Transmission and Rear: The transmission is a 2spd and the rear is a Ford 8”
unit. It has 3.21 gears in it and was
overhauled (including u-joints) in 2010. The transmission shifts smoothly and
has no issues. The shifter is a brand
new Hurst V-Matic 3. Interior: The interior has been completely gone over and features
brand new seats and carpets. There is
subtle red LED lighting in the footwells.
It has a new Grant leather steering wheel with a horn button (not hooked
up). There is a Sun tach on the dash and
gauges mounted where the factory radio once sat. If I were going to keep it I’d move them down
to the bottom edge of the dash and either install a radio or a radio delete
plate to cover the hole. The instrument
panel is out of a 1962 Comet. I have a
correct bezel that comes with the car should you wish to replace it. The headliner is in good shape. There are nice billet pulls in place for the
control knobs. Brakes: It has manual brakes with drums in the rear but the fronts
have been converted to disc brakes by way of a Scarebird conversion kit. They stop perfectly with no noise or other
issues. Emergency brake is not hooked
up. Wheels/Tires: Vintage 14” slotted wheels all the way around. 4 lugs on the front and 5 on the back. Not sure of the manufacturer but “made in the
U.S.A.” is cast on the rear of each wheel.
Tires are is decent shape and are holding air. Miscellaneous: The truck goes down the road straight and true and has none
of the loose steering issues I saw in so many of these trucks when I was
looking to purchase one. It has new chrome
Lakewood traction bars. The tails have
blue dots in them. All signals and
lights work. There is a horn in the car
but it isn’t hooked up. Extra Parts/Items: Shop manual including wiring diagram insert. Some receipts and misc. documentation for
previous owner. Some spare parts that I
will dig through and pass on to the new owner if they want them. As it sits right now, this is a great truck for what we had
intended it for – i.e. running errands, going to local cruise-ins, hauling
things around, etc. The 2spd
transmission is a very tough and well-built piece but which limits its
usefulness as a long-haul highway vehicle – particularly with 3.21 gears
hanging in the rear. That’s not to say
that it can’t travel great distances but it’s more of a back road truck that
can cruise comfortably at 55mph anywhere.
For example, I purchased the truck in Cincinnati which is 5+ hours at
75mph via the major highways. I drove it
home using the back roads for 8 hours straight at around 55mph on average with
no issues whatsoever. If you are
interested in taking this truck on longer highway trips you could either put
some numerically lower gears in the back or swap out the transmission. Please know that I do not have to sell this truck (in fact,
my kids are quite attached to it) but will do so at the right price point in
order to put the money toward a larger vehicle.
This isn’t a $10K truck but it isn’t a $3K truck either so please be
reasonable in your offers. My reserve is
set at my break-even point which is less than 1/2 of the NADA low retail
value for this vehicle. If it doesn’t
sell I’ll just keep driving it and working on it until it does. It is for sale locally and I reserve the
right to cancel the auction and all bids if it sells first on this end. The truck is being sold as-is and where-is without warranty of
any kind. I have done my best to
describe it accurately but it is a 52 year old truck. I encourage an in-person inspection prior to
bidding and I will do whatever I can to facilitate that. I will help with delivery and will even
consider driving it a couple of hundred miles in one direction or the
other. As I stated previously, I’d be
confident driving it anywhere as long as I can avoid any extended 70mph driving
on major highways. The truck has a clear (i.e. not salvage, not rebuilt)
Ohio title. There is a note that “mileage
exceeds mechanical limits” as it is impossible to tell how many miles are on
the truck with the replacement instrument panel in place. I guessed at 122,000 based upon history from
the previous owner but who knows. Finally, I am looking for a later model Ranchero or a
vintage pick-up so if you have a 1967-77 Ranchero or a 60s or 70s (or earlier) Ford
or Chevy pickup let’s talk… Good luck and please feel free to ask any questions you
might have. |
Ford Ranchero for Sale
Auto Services in Ohio
Yocham Auto Repair ★★★★★
Williams Auto Parts Inc ★★★★★
West Chester Autobody ★★★★★
Valvoline Instant Oil Change ★★★★★
Valvoline Instant Oil Change ★★★★★
Sweeting Auto & Tire ★★★★★
Auto blog
2015 Ford F-Series Super Duty Power Stroke
Tue, 29 Jul 2014What weighs 30,000 pounds? Big Ben's Westminster bell. A navy ship anchor. Or as we found out during our first drive program for the 2015 Ford F-Series Super Duty, seven pallets of cinder blocks loaded onto a dual-axle gooseneck trailer. The test was part of a raft of towing demonstrations that showcased the new Super Duty's impressive tug capacity, which maxes out at 32,100 pounds. That's 1,200 more than its nearest rival, the Ram 3500, when equipped with its upgraded 6.7-liter Power Stroke diesel V8. Such is the heavy-duty pickup truck business, a diesel-fueled game of one-upmanship with only three players: Ford, Chevrolet/GMC and Ram. And in this game, the one with the most torque wins.
Until 2014, Ford was the one to beat, with its 6.7-liter Power Stroke diesel bringing 400 hp and a massive 800 lb-ft of torque to the table. Then last year, Ram did exactly that, serving Ford with a beefed-up Cummins turbodiesel inline-six in its freshened Ram Heavy Duty truck line with 385 hp and 850 lb-ft of torque, enabling it to tow up to 30,000 pounds. But Ford claims it had designed its engine to be relatively easy to upgrade when the time called for it, so for 2015, Ford bolted a larger turbo to the Power Stroke, bringing output to an insane 440 hp and 860 lb-ft of twist, all without reducing fuel efficiency. Maximum tow capacity rises from 24,700 lbs to an incredible 31,200 lbs for the F-450 dually.
As for GM's HDs? They lag behind the lot with their 6.6-liter Duramax V-8, producing 397 hp and 765 lb-ft of torque. Yeah, you know things are serious when the trucks with 765 lb-ft are the knock-kneed wimps of the lot.
Diesel Power finds the ultimate modified oil-burner
Sat, 24 Aug 2013For nine years, Diesel Power magazine has run the Diesel Power Challenge, this year's grindfest being "a week-long torture test that features seven events, nine trucks, 8,000 horsepower, and nearly 15,000 pound-feet of torque." The road to being crowned "the most powerful truck" starts with a dyno run, and then continues through the completion of a CDL-style obstacle course, an eighth-of-a-mile drag race while towing a 10,000-pound trailer, a quarter-mile drag race without a trailer, a fuel economy test in the mountains and finally a sled-pulling test through a 300-foot-long packed-mud pit.
What kind of trucks get into such a fight? Last year's winner, for instance - who upgraded his truck this year to prove he didn't "luck into the win" - drives a 2008 Ford F-250 Super Duty with a 6.4-liter Power Stroke V8 upgraded with a custom intake, Elite Diesel triple turbos and a two-stage nitrous system. Another competitor has a 2005 Dodge Ram 2500 powered by a 5.9-liter Cummins inline-six, upgraded with Garrett turbos, dual-stage nitrous, a seven-inch exhaust stack and twin fans built into the bed to cool the Sun Coast Omega transmission. The numbers on that truck: 1,255 horsepower, and 2,063 pound-feet of torque at the wheels. Naturally, as the image above might suggest, things don't always end well.
You'll find all five videos covering this years challenge below. A scene in the dyno video sums it all up perfectly: a competitor leaves his nitrous on too long and the crew is treated to some ominous poppings, he leans out the window, throws both hands up and shouts, "Amer'ca!"
Ford acquires Livio to bolster connectivity biz
Thu, 26 Sep 2013Ford Motor Company has announced the acquisition of Livio, a Ferndale, MI-based software development company best known for aftermarket in-car connectivity devices, but also as a supplier of technology for proprietary systems for automakers. Livio, co-founded by Sigal and Massimo Baldini, will be a wholly owned subsidiary of Ford Global Technologies.
"With the additional expertise Livio provides us, Ford intends to continue to lead the next generation of in-car connectivity with technology advancements that give consumers more options to access their devices on the go," said Paul Mascarenas, chief technical officer and vice president, Ford Research and Innovation, in a statement.
Ford is clearly trying to beef up its in-house tech capability around telematics and device connectivity. While the Blue Oval has been a leader in these areas with SYNC and MyFord Touch in terms of getting the systems into as many cars as possible, the execution of the applications have been criticized for glitches.