1947 Ford 1 (one) Ton Pickup Truck Project 1942 on 2040-cars
Spring Creek, Nevada, United States
|
I bought this truck and was told it is a 1942. I have not checked the VIN on the frame to confirm this. With the truck came a 1947 Frame with an Idaho Title. These trucks also usually had the VIN number on a data plate attached to the inside of the glove box door. I have the door and data plate with the VIN for the 1947 Title that matches the extra frame. The extra frame has all of the running gear except the motor. The motor in the complete pickup is a six cylinder but I have not tried to turn it over. It looks to be complete except for the air cleaner. If you look at the pictures, you will notice the extra frame has 4 tires that hold air. The truck has one or two that will hold air. This has a 5 hole bolt pattern that is larger than a 1/2 ton Ford pickup. These are 17” Split rims so however the truck is loaded it only has 5 or 6 tires that hold air. The distance between the studs center to center of the stud is 4 inches. And the studs are big. The truck has no glass in it except for broken glass in the door windows. I picked 6 or 8 rocks out of the cab that took care of the windows. I tried to show the rust hole in the floor. I would plan on some work there. The cab has rust in the cab corners but the doors look good. The bed, other than dents and some cut out holes is not too rusty. The wood is bad. I tried to show the worst of the dents on the roof where it looks as if someone got on top. All in all not a bad cab. The wheelbase of this truck is 122 inches. I thought it would probably fit on a later S10 or full sized pickup frame?? That’s where the glove box VIN might be handy. That’s what I had planned to do with it but, as my wife told me, I have more projects already than I will get done in my lifetime. Unfortunately she is right. If you plan to use the original frame the gentleman I got it from told me he understood the brakes had been re-done on the 47 frame. I have not had anything apart to look at that so cannot confirm. Extra parts include a hood with the latching mechanism and Ford trim, extra set of front fenders, inner fender panels, and grill. I do have the side trim for the hood and a decent front bumper is in the bed. Also I have what I believe is a decent gas tank that someone plugged the inlet to prevent water from entering. I also have a set of headlight trim rings and park light rings. If you have any specific questions just ask. I will be happy to help get it loaded to the best of my ability. I require $500.00 via Paypal within 48 hours and rest before or when picked up. |
Ford Other Pickups for Sale
1940 ford pickup
1925 ford model t model tt truck
Ford f-super duty custom (efi) truck with boom & bucket mounted on it
1937 ford pickup
1938 ford pickup model 81c has 1950 flathead v8 100hp
1951 ford truck upgraded engine 300 inline 6 automatic c6 tranny duallyAuto Services in Nevada
V & V Automotive ★★★★★
SUV & Trucks R Us ★★★★★
Sunset Collision Center Inc. ★★★★★
Sin City Performance ★★★★★
Silver State Automotive ★★★★★
Safe Autocare ★★★★★
Auto blog
Fiat boss Elkann being mentored by... Bill Ford?
Tue, 26 Mar 2013Fiat Chairman John Elkann has been turning to an unusual source for advice on the car business. While speaking during an interview with The Detroit News, Elkann said he often asks Bill Ford Jr. for advice on how to proceed with the turnaround at Chrysler. "It's great to have the opportunity to share this with someone like Bill, who has experienced many things and gone through many things ... especially linked to Detroit." Elkann said.
As the Agnelli family heir, Elkann has inherited a long and fruitful friendship with the Ford family. While Giovanni Agnelli built his first Fiat four years before Henry Ford created his first vehicle, it was Ford that showed Agnelli the benefits of mass production and helped pave the way for what would become the Fiat empire.
Giovanni's grandson, Gianni, helped mentor Bill Ford when he was elected chairman of Ford Motor Company. Now, Ford is returning the favor by helping Elkann navigate the automotive industry's tumultuous waters.
Ford Q3 pretax profits drop to $1.18B
Fri, 24 Oct 2014Following positive third quarter financial results recently from General Motors, rival Ford took a tumble in Q3. The automaker posted pre-tax profits of $1.18 billion, compared to about $2.59 billion in Q3 2013, a drop of around 54 percent. Net income also suffered with $835 million made in the quarter, versus $1.272 billion last year, a decline of about 34 percent. The Blue Oval blamed the gloomy figures on three reasons in its release: "lower volume, higher warranty costs and adverse balance sheet exchange effects."
There were problems of one kind or another in practically every region. North America experienced higher warranty costs than expected, partially due to recalls. The sales volume for the quarter was 665,000 units, versus 725,000 in Q3 2013, and pre-tax results amounted to $1.41 billion versus $2.296 billion last year.
South America and Europe both posted worse pre-tax results than last year. On the bright side, European volume was up slightly to 321,000 vehicles, from 303,000 in Q3 2013. The Middle East and Africa also lost $15 million, but that was an improvement compared to the $25 million loss previously experienced in this region.
Are you the next Ford Edge? [UPDATE]
Wed, 13 Feb 2013What looks to be the next Ford Edge has been leaked in an apparent corporate Powerpoint presentation deck. Despite the thumbnail image's blurry and pixelated quality, it appears as if the next generation crossover will be staying close to its current aesthetic despite an all-new front clip with redesigned grille, headlamps, and lower fascia with integrated fog lights.
The upscale-minded Blue Oval CUV is due for a redesign in 2015, having just received a mid-cycle refresh for 2011. It isn't clear what changes lie beneath the new skin, either in terms of mechanicals or interior refinement, but we suspect Ford will be looking to put some distance between the next generation model and the new Escape, which is suddenly much more car-like and not that far off the more expensive Edge in terms of overall size, power or refinement.
UPDATE: Substituted clearer image - thanks, Sean!