Ford: Mustang Svt Cobra on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Ford dissects the heart of the 2015 Mustang, its engine range

Happy Mustang Day. Are you tired of hearing about the 2015 Ford Mustang yet? No? Good, here's a bunch of mechanical data on Ford's sixth-gen muscle car, along with cutaways of the GT's 5.0-liter V8 and the new 2.3-liter, EcoBoost four-cylinder shown above. We also have a smattering of info on the Stang's updated transmissions and an exploded-parts-diagram view of its all-new independent rear suspension.
Ford is set to make waves offering the Mustang with a turbo for the firs time since the small-volume SVO of the 1980s. Displacing 2.3 liters, the engine's twin-scroll turbo should help the four-cylinder turn out a projected 305 horsepower and 300 pound-feet of torque, while also returning the best fuel economy in the Mustang's engine lineup. As we said in our Deep Dive, the EcoBoost will be slotted in as a premium engine, above the 3.7-liter V6 but below the 5.0-liter V8.
Speaking of that high-revving eight-cylinder, it's receiving a new cylinder head with high-flow ports. The intake and exhaust valves are larger and the cams have been replaced, among other tweaks. It should rev even higher thanks to a rebalanced crankshaft and forged connecting rods. Ford is still claiming a projected 420 hp and 390 lb-ft, although as many of the changes for the 2015's V8 come from the 2013 Boss 302, we're going to assume there's some sandbagging at work.

Ford opens the doors on its Swedish rally skunkworks

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.