Ford: Mustang Shelby Gt500 on 2040-cars
Reesville, Ohio, United States
Up for sale is my 2012 Ford Mustang Shelby GT500. This car is a head turner with tons of upgrades. This car has spent its entire life in Florida until this year. This car is loaded with navigation, recaro racing seats, and track package. I purchased the car with all of the upgrades already completed from S&R Performance. I have $39k in invoices for the completed work. Upgrades include:- Whipple 2.9 Supercharger - Whipple Twin 75mm throttle body - Whipple 123mm Cold Air Kit- NGK TR6- Dyno Tuned- Stainless Headers w/ X pipe- Bigger AFCO heat exchanger -Reische 170degree thermostat- BMR rear control arm package level 3- Comp Cam- Comp valve and springs - 1200hp alky control system- BMR lower control arms- BMR K member - Aluminum driveshaft Metco Motorsports Idler Set-Whipple Pulley- Methanol injection -NGK spark plugs- Manley Pro I- Beam Rods- Manley 8.9:1-ARP Main stud kit- ARP head studs- Kings Performance race bearings- Kings race rod- Ford racing oil pump- 5.4l production cast iron cylinder block- Cometic gasket kit-Manley race valves 36mm plus 1mm intake valves-Manley 31mm plus 1mm exhaust valves- 5.4l 4v Mustang SVT camshaft drive kit- Livernois Motorsports machines cylinder head and completed CNC porting - Ford Racing 15in BBK This car has no accidents and a clean vehicle history. It starts right up, shifts through all the gears as it should. Its a strong runner with no mechanical issues. There is zero rust and no dents on the car. There are two small nicks that are smaller than a penny. One is on the passenger rear quarter panel and the second is on the center of the rear bumper. Neither are very noticeable unless you are specifically looking for them. The interior of the car is flawless. The original tires are about 70-75 percent up front and about 50-55 percent on the rear. This car is for sure to put a smile on anyones face. Only reason for selling is to build a home. Please dont hesitate to ask any questions that I may not of addressed.
My eMail : ineiirigobertowoolley@yahoo.com
Ford Mustang for Sale
Ford: mustang(US $9,000.00)
Ford: mustang gt premium coupe 2-door(US $13,800.00)
Ford: mustang shelby gt500 coupe 2-door(US $18,000.00)
Ford: mustang gt500(US $19,000.00)
Ford: mustang gt500 shelby(US $16,000.00)
Ford: mustang shelby gt500 coupe 2-door(US $18,000.00)
Auto Services in Ohio
Yocham Auto Repair ★★★★★
Williams Auto Parts Inc ★★★★★
West Chester Autobody ★★★★★
Valvoline Instant Oil Change ★★★★★
Valvoline Instant Oil Change ★★★★★
Sweeting Auto & Tire ★★★★★
Auto blog
Consumer Reports says these are the worst new cars of 2014
Thu, 27 Feb 2014Consumer Reports has announced its annual list of worst vehicles, a cringe-inducing contrast to its list of top vehicles. Ignominiously leading the way in 2014 is Chrysler, which has a staggering seven models listed.
Jeep nearly sweeps the small SUV segment by itself, with its Compass, Patriot and 2.4-liter version of the new Cherokee, while the only midsize sedans listed by CR were the Chrysler 200 and Dodge Avenger. The new Dodge Dart and the Dodge Journey round out CR's condemnation of Chrysler.
Ford is taking heat as well, with the Taurus, Edge and their counterparts from Lincoln all listed as the worst vehicles in their respective segments. Toyota doesn't fare much better, with its Lexus IS, Scion iQ and tC also making the list.
2015 Ford Mustang EcoBoost
Fri, 16 May 2014Earlier this week, Ford invited us to Charlotte, NC, to ride in an all-new 2015 Mustang fitted with its turbocharged 2.3-liter EcoBoost four-cylinder. It's the first forced-induction, four-cylinder ponycar for the Blue Oval since the sun set on the 1986 Mustang SVO. We jumped at the opportunity, as only a handful of people have ever been in the passenger seat of this new car, and most automotive media won't get as close as we did until this fall.
As we revealed in our Deep Dive, Ford will slot this new turbocharged four as premium powerplant between its naturally aspirated 3.7-liter V6 and the naturally aspirated 5.0-liter V8. At last mention, the automaker said the direct-injected, all-aluminum engine will develop 305 horsepower and 300 pound-feet of torque, returning the best fuel economy of the three powerplants in the process. History buffs will note that those figures are appreciably stouter than the 200 horses and 240 lb-ft that the '86 SVO realized out of the same displacement, and the latter's figures were hugely impressive at the time. On paper, the new EcoBoost four looks to be a good fit for most owners who want to balance performance with efficiency - we were eager to see how it felt from the passenger seat.
Riding Notes
This is what a 3D-printed liquid metal Ford Torino looks like
Sat, 12 Oct 2013Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.