2001 Ford Mustang Gt Bullitt Coupe 2-door 4.6l on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

2014 Ford Transit unveiled in Chassis Cab and Cutaway versions

As a leader in commercial vehicles here in the US, we knew Ford wouldn't take too long to show off the chassis cab and cutaway versions of its 2014 Ford Transit van. Set to go on sale this fall, Ford already revealed the full-body version of the Transit, and now it has pulled the cover off exposed-frame models just in time to to compete against the all-new Ram Promaster.
The term "chassis cab" refers to models with a fully enclosed cabin used for box vans or rental trucks, while cutaway models leave the cabin open behind the B-pillars for a pass-through on vehicles such as Class C motorhomes or ambulances. Both will offer three wheelbase options (138, 156 and 178 inches), the choice of single or dually rear axles, and plenty of upfitter-friendly touches including a pre-wired body harness and multiple body mount locations.
The new design will also help make upfitting a little easier since the fuel filler is now built into the cab (just behind the driver's door). Those integrated fuel filler necks will serve to feed either a 3.7-liter V6, a 3.5-liter EcoBoost V6, or a 3.2-liter Power Stroke diesel. Transit chassis cab and cutaways will wear varying Gross vehicle weight ratings from 9,000 pounds to 10,360 pounds depending on spec.

Jaguar design boss admits X-Type was a mistake

History has a way of repeating itself, especially in the auto industry. When Jaguar was owned by Ford, the British brand attempted to field a competitor for the BMW 3 Series, called the X-Type. Based on the bones of a Ford Mondeo, it aped the styling of Jaguar's flagship model, the XJ, while borrowing liberally from the Ford parts bin. That was 2001.
Now, in 2013, Jaguar is planning a new 3 Series challenger based on the platform previewed by the C-X17 Concept, while Ford is attempting to take the latest Mondeo upmarket. The moves have both brands recognizing where, why, and how the X-Type failed. "It didn't look mature or powerful or anything. It was just a car," Jaguar's current head of advanced design, Julian Thomson, told PistonHeads. Basing the X-Type on a front-drive car while giving it styling that was meant for a rear-driver lead to proportions that "were plainly wrong," Thomson told PH. Ford's European head of quality, Gunnar Herrmann, added that the X-Type was "a fake Jaguar, because every piece I touch is Ford."
For what it's worth, the X-Type's successor in the segment will sport rear-drive, with plenty of input from Ian Callum. Thomson described the new model, which would challenge the 3 Series as having, "Big wheels right to the ends of the car, low bonnet, short overhangs, very low cabins." Sounds good to us.