1991 Ford Mustang Gt Convertible 331 Vortech T-trim on 2040-cars
Rockwood, Michigan, United States
Body Type:Convertible
Engine:5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Interior Color: Black
Make: Ford
Number of Cylinders: 8
Model: Mustang
Trim: GT Convertible 2-Door
Drive Type: RWD
Options: CD Player, Convertible
Mileage: 63,000
Exterior Color: Red
Car was just dyno tuned at Alternative Auto. Engine was not revved above 5200 but can go to 6000. Made 500 rwhp at 5200 and was still pulling hard. Car is very fun to drive on street. Will need new rear tires soon. Paint is nice has a few small nicks. Top has 2 small tears but nothing major. Car is clean with 63,000 original miles always stored inside.
Parts on car include :
331 ci Eagle rotating assembly, 4340 crank, H-beam rods, SRP pistons
Victor Jr. cylinder heads 2.05 int. 1.60 exh.
Comp Pro Magnum rocker arms 1.6
1 piece comp moly pushrods
Pro M 77mm mass air meter
Anderson Power pipe
Vortech T-Trim supercharger
60lb injectors
Ford Motorsport aluminum valve covers
Ford Motorsport radiator
Spal electric fan
DSS main support
Cylinder head and Mains are all studded with ARP studs
Canton 7qt oil pan
Accufab 70mm throttle body and EGR plate
Holley System intake manifold, Jet hot coated
EFI Renegade crank pulley
Crane custom blower cam .542 int .563 exh
King engine bearings
Suspension:
Koni red struts and shocks
QA1 k-member and lower control arms
D&D coil over kit in front
BBK caster camber plates
HPM subframe connectors
8pt roll cage
rear suspension is stock except for the shocks and Motorsport B springs
Fuel system:
Aeromotive A1000 fuel pump
Aeromotive stainless filter
Aeromotive fuel rails
Aeromotive regulator
Aeroquip -10 feeding pump, -8 feed line and -6 return
all Aeroquip lines and fittings on car
Trans:
AOD with PA rebuild kit in it
Vasco input shaft
PA deep pan
TCI 10" competition converter
PA manual valve body with transbrake
31 spline moser axles with c-clip eliminators
Auburn pro diff
trans cooler with all braided lines to and from trans
3.73 Ford motorsport gear
Body:
HO fibretrends 4" cowl hood
Cobra grille instert with oe chrome pony (not fake plastic one)
LX taillights
Interior:
Autometer pro comp water temp and oil pressure in the air vents
Autometer sport comp boost and fuel pressure on the pillar
Pioneer CD player in the dash
Carpet and rest of interior is mint
Exhaust:
Mac 1 3/4" jet hot coated hedders
2 1/2" h-pipe
2 1/2" cat back
Flowmaster 2 chamber mufflers
Weld draglites front and rear
P275/60r15 Mickey Thompson drag radials in rear
Will get more pictures as soon as it stops raining.
Ford Mustang for Sale
- 1995 ford mustang with no reserve
- 1969 ford mustang mach 1 428 cobra jet v8 5-speed manual no reserve
- 2005 ford mustang saleen s281 convertible 2-door 4.6l
- 2014 ford mustang(US $32,982.00)
- 1996 mustang cobra svt(US $14,400.00)
- Blue, automatic, convertible, low miles, one owner, clean, pony, ford, shaker(US $11,799.00)
Auto Services in Michigan
Xtreme Sound & Performance ★★★★★
Westborn Chrysler Jeep ★★★★★
Welt Auto Parts & Service Co ★★★★★
Valvoline Instant Oil Change ★★★★★
Trojan Auto Connection ★★★★★
Todd`s Towing ★★★★★
Auto blog
Ford F-150 EcoBoost in NHTSA probe for acceleration issue
Tue, 28 May 2013According to Automotive News, the National Highway Traffic Safety Administration is launching a probe into 400,000 Ford F-150 models over possible acceleration problems. According to the article, NHTSA has received 95 reports "alleging incidents of reduced engine power during hard accelerations" on 2011 to 2013 F-150 models equipped with the company's 3.5-liter EcoBoost V6 engine.
Automotive News reports that Ford has issued three technical service bulletins "related to intermittent stumble/misfire on acceleration from highway cruise in humid or damp conditions," according to the government agency's documents. About one third of the 95 reports NHTSA has received cited humid or rainy conditions when these problems allegedly occurred.
These technical service bulletins have allowed dealers to address a "condition related to moisture accumulation in the charge air cooler during extended highway cruising at constant throttle in humid or damp conditions," AN reports, citing NHTSA documents. Furthermore, the TSB outlines details for "reprogramming the powertrain control module with the latest calibration and installing a new CAC and air deflector plate."
Ford will build Hackmobile out of Transit Connect Wagon
Fri, 27 Dec 2013What you see in the above image is a rendering of the Hackmobile Transit Connect Wagon. What is that? It's a "mobile fabrication and hacking unit" that includes tools for metal- and woodworking, 3D and electronics fabrication, a three-axis CNC machine called "The Fabber," a video projector and screen, an air compressor, an 84x48-inch work surface that folds out like a Murphy bed and oh so much more. When not in use, all of the implements fold neatly into the back of Ford's award-winning van.
But perhaps the more important question is why is that? Because Make Magazine held an Ultimate Maker Vehicle Challenge in conjunction with Ford in which ten teams created were charged with creating "the ultimate Ford Transit Connect Wagon for the do-it-yourself enthusiast." Team Twin Cities Maker won the competition with the Hackmobile, and in addition to winning $10,000, Ford has declared it's actually going to build the thing - which is great, because if they can actually engineer a road-legal Hackmobile Transit Connect Wagon as envisioned, the inevitable A-Team movie reboot might need to think about including it.
Check out the video below for a cheeky walk-through of the Hackmobile, and get all the particulars in the press release below that.
Ford Edge Concept previews new look, can park itself remotely
Wed, 20 Nov 2013It turns out the image we saw back in February did, in fact, reveal the next-generation Ford Edge - at least in concept form. We still have to wait to see what the design will look like in production guise, but until then, Ford is giving us a good idea thanks to the Edge Concept being introduced at the LA Auto Show.
The new styling is an evolution of the current crossover's face with narrow headlights and a prominently slatted grille, while the rest of the design adds a more dynamic appearance with interesting body creases and horizontal taillights. We haven't gotten a look inside the Edge Concept just yet, but Ford is promising a suite of advanced driver-assist technologies including a new self-park system that allows activation from inside or outside the vehicle along with obstacle avoidance and an adaptive electric power steering system.
Ford will continue to offer an EcoBoost engine option in the upcoming Edge, and it will get active grille shutters to help maximize fuel efficiency. No word yet on when we'll be seeing the next-gen Edge in production form, but as we reported recently, it will become a global model in markets including Europe, China and South America. Ford's press release is posted below, but we'll have more information and images up later today.